High Strength PP Fiber Hybrid Type for Thin Walled Pre-Cast

High Strength PP Fiber Hybrid Type for Thin Walled Pre-Cast

PP Fiber Hybrid Type Introtuction:

1. PP twist fiber is a 100% pure mixed copolymer composite structural macro fiber, which is successfully used as a substitute for steel fiber, welded wire mesh and traditional rebar, and is widely used in various secondary reinforcement applications.

2. PP Fiber Hybrid type is actually a mixture of two fibers: a standard fiber mesh to reduce and control shrinkage and temperature cracking. A twisted bundle of fibers made from a strong synthetic copolymer that increases the flexibility and breaking strength of concrete. High fracture strength, good dispersion, strong bonding ability. It is widely used to replace steel fiber reinforcement cement concrete and has crack resistance.

100 Twisted Hybrid (98% Twisted + 2% Mesh by weight)

PP Fiber Hybrid Type Applying Instruction:

1. Ration design of the fibre concrete: Generally the recommended amount to add to the concrete is more than 2.7kg per sqm(0.3% by volume), reinforcement adding amount is 5.5kg, Compared with adding 47kg of steel fibre, 5.4kg polymer fibre has the same volume ratio to the concrete.

2. Length: 48mm to 54mm for common crack-resistant requirement.

3. Mixer Adoption: Double-axle horizontal compelling mixer is priority.

4. Mixing process: Crushed stones, fibers and sands are put into the mixer in succession. After stirring for two minutes, fiber will fully spread and then add cement and water and stir normally. The addition of materials also can be put into as common concrete, but the stirring time should be properly prolonged to make fiber to be completely mixed .

5. Shaping & Maintenance: There is no special requirement, may along the vibrating time for 30s, The maintenance of the fibre concrete should be done same as the normal concrete.

PP Fiber Hybrid Type Specification: ​

PP Fiber Hybrid Type Application:

1. PP Fiber hybrid type can be used for Industrial and residential floors

2. PP Fiber hybrid type can be used for Whitetoppings, bridge decks and pavements

3. PP Fiber hybrid type can be used for Thin walled pre-cast (septic tanks, vaults, walls, etc.)

4. PP Fiber hybrid type can be used for Mass concrete

PP Fiber Hybrid Type Packing:

1kg each PE bag, 10kgs each woven bag

1kg each PE bag or water soluble paper bag, 11kgs each carton

Cetificate:

Briture Co., Ltd. was founded in year of 2011 by Mr. Wang Yao in Anhui, China.  who has rich experience of 20years to supply chemical materials, especially in the field of printing ink and paint industry. 

In the same year, we cooperated with Alibaba for developing export business and became to be one of the top suppliers in Chemical field.

In Year of 2017, the Hongkong Briture Co., Limited was founded. 

Since 2018, Briture was verified by SGS.

Briture is dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfication. During our production, we test the quality from every batch and check again before shipment to ensure the quality. In order to keep the stable quality for customers, we never change the materials source. We believe our quality and service will bring success to each customer. No matter selecting a current product from our company or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We sincerely welcome your cooperation, and look forward to building business relationship with you.

Briture, your reliable partner in China.