Wood Pellet Production Line Biomass Pellet Making Machine Biomass Pellet Making Machine
Introduction of Biomass Pellet Machine
The biomass pellet machine is applied to the material with low adhesiveness and low shaping ,such as the rice husk, sunflower seed husk, peanut shell and other fruit shell branch, trunk, bark and other wood waste; a variety of crop straws, rubber, cement ,ash and other chemical materials. The pellet machine is widely used in the feed plant, wood processing, fuel plant, fertilizer plant and chemical plant etc. It is the ideal pressing shaping equipment with low investment and high profit.
1. Raw materials diameter requirement : 3-5mm(If large ,crusher machine should be used)
2. Raw materials moisture:15-25%.(If beyond the scope,dryer machine should be used )
Picture of Biomass Pellet Machine
| | | | |
| | | | Butter pump Soft cabinet Dust removal paper |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
Working Principle of Biomass Pellet Machine
First, the machine adopts the motor direct connection. The motor is connected to the gear shaft via a gear coupling. Through the gear 90 ° change, horizontal motor drive vertical hollow spindle. The spindle drives the press roll to crush the inner surface of the mold to complete the pressing process. When it’s working, the material falls vertically on the surface of the shelf plate by the drawing inlet. Through the rotation of the shelf plate to make the material evenly in the mold cavity surface.(The contact surface of the press roller with the mold) The powder material passes through the hole of the mold under the rolling of the press roll.(Evenly distributed in the mold on the surface of the hole) This process is subject to high pressure, high temperature,physical changes or appropriate chemical changes.(According to material) It promotes the powder material to form a continuous cylindrical solid body. The cylindrical solid body is continuously extended until it is cut by the cutter around the uniform mold to form a certain size of the particles. The particles scattered around the mold are concentrated from the teeth to the discharge port. The particles are automatically dropped under the action of gravity, and the granulation process is completed.
Note: All port. parts of the machine are installed on the machine surface machining, assembly accuracy, excellent machine performance.
Advantages of Biomass Pellet Machine
1. The mold is still, pressure roller rotation, material centrifugal, evenly around.
2. The mold has two layers, up and down dual-use, cost reduction efficiency; can also be dual-use, high-yield energy.
3. Annular mold, vertical structure, which facilitates the cooling of the granulation chamber.
4. Separate discharge device to ensure the formation rate of particles.
5. Independent automatic lubrication system brings a good bearing lubrication effect.
6. Feeding system has a frequency conversion device and achieves the adjustable of feeding speed. It can promise the different materials.
After Sales Service
1. One year for machinery warranty.
2. We have the cheap spare parts supply.
3. We can sent engineer to install and maintain on site.
FAQ
1)Are you a factory or trade company?
We have our own factory as an international supplier, a professional manufacturer and a general international trader.
2) How can I trust your company?
1.Henan Wheat Import And Export Company Limited, established in 2005, located in Zhengzhou City--Capital of Henan Province, the center of China mainland.
2.We have special QC department, testing every single equipment, from voltage to appearance, our workers will inspect strictly in order to supply the best and most stable machine for our customers.
3.Our equipment are strictly designed and produced according to CE standard, we care for every details and the quality.
3) How long is your delivery time?
Generally it is 30 days after received your deposit.
4) Is your price competitive?
We can provide the highest quality machines at the best price.
