What is the purpose of a four-wheel alignment on a car?
Doing four-wheel alignment for vehicles can improve the stability
of vehicle driving, increase the contact area between vehicle tires
and the ground, avoid other hidden problems in the vehicle chassis,
and ensure the safety of vehicle driving.
Four-wheel positioning is to adjust the vehicle four wheels,
steering mechanism, the relative position and angle of the front
and rear axles, if long time in the uneven road driving, vehicle
tires, chassis will be subjected to varying degrees of bumping,
bumped, may make the vehicle chassis data inaccurate, at this time
you need to pass the four-wheel positioning, will be corrected by
the data of the vehicle chassis.
In general, the vehicle use a year time, or vehicle driving 15,000
kilometers mileage, you need to do a four-wheel positioning for the
vehicle, if the vehicle is often in poor road conditions, do
four-wheel positioning cycle, need to be appropriately shortened.
How does a 3D wheel aligner work?
The working principle of the 3D wheel aligner is that four target
reflectors are mounted on the four rims of the vehicle, and then
the wheels are rolled, and the camera continuously shoots the
geometry on the reflectors. The computer analyzes the geometric
changes and calculates the wheel and chassis positioning
parameters, and then displays the results on a screen. This process
mainly applies physical perspective and computer information
processing technology.
The Functions & Features of wheel alignment:
>The model data is complete,and the usercan add the data by
himself.
>The target does not have any electronic devices and the failure
rate is low.
>Intelligent compensation is carried out by the error correction
system.
>Free push technology can improve the speed and efficiency
ofmeasurement.
>The intelligent indication system improves the work efficiency.
>The intelligent control system can improve the service life of
the core devices.
>The intelligent diagnosis system can quickly analyze the
hardware connection
>The intelligent identification system improves the measurement
efficiency.
>Inteligent alarm system for target monitoring.
>Intelligentone-click data upgrade.
>Intelligently scan the code to produce the location report.
>Automatic beam tracking hoist,ltis convenient to adjust the car
>With mobile machine cabinet,can be used in multiple locations.
>Meet the use of all kinds of hoist and gutters.
The Technical Parametes of wheel alignment:
Measurement
Parameters |
Measurement
Range |
Measurement
Accuracy |
| Camber | 土 2 ' | 士 8 ° |
| Toe | 士2' | 士 5 ° |
| Caster | 士4' | 士 2 0 ° |
| wheel distance difference | 士2' | 士 2 ° |
| wheelbase difference | 士2' | 士 2 ° |
| setback(front) | 土2 | 士 2 ° |
| setback(rear) | 土2' | 士 2 |
| wheel distance difference | 士0.64CM | <265cm(105in) |
| wheelbase difference | 士0 .64CM | <533cm(210in) |
