Product Description of IC695ALG106
The IC695ALG106 is a PACSystem RX3i analog input module. This
module features Six (6) isolated analog input channels that accept
of variety of voltage and current standard signals such as +/- 10V,
0 to 10V, +/- 5V, 0 to 5V, 1 to 5V, and 0-20 mA, 4-20 mA and +/-20
mA, Voltage and Current signals, respectively. The IC695ALG106 has
backplane current draw of 230 mA maximum @ 5.0V +5% / -2.5% and 320
mA maximum @ 3.3V +5% / -3%. From the isolated power supply, it has
a current draw of 500 mA @ 19.2 V to 30 VDC. It can operate with
PACSystem RX3i module with Central Processing Unit (CPU) version
5.0 or later. For configuration and programming of the module,
applicable programming software is Proficy Machine Edition version
5.6 SP11 and later. The Machine Edition version 5.6 SP11 and later
has a built-in analog to digital converter (ADC) with a conversion
resolution of 16 bits with data converted to Floating-Point IEEE 32
bit or 16-bit integer in a 32-bit field register. Each input
channel has configurable filter options specifically 8Hz, 12Hz,
16Hz, 40Hz, 250Hz, and 1000Hz. The module’s scan time is 1ms,
regardless of the filter setting with varying settling times based
on the configured filter options. Settling times include 127 mS at
8 Hz Filter; 67 ms at 12 Hz Filter; 56 mS at 16 Hz filter; 21 mS at
40 Hz filter; 3.1 mS at 250 Hz filter and 0 mS at 1000 Hz filter.
The module’s calibrate accuracy is 0.1% of range at 25°C and 0.2%
of the range over the entire temperature span.
The IC695ALG106 is a PACSYstem RX3i Programmable Automation
Controller (PAC), analog input module. This module is formerly
manufactured by GE Intelligent Platforms (GE IP), now under Emerson
Automation. This module features Six (6) isolated input
individually configurable to receive voltage and current signals
specifically, +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V and 0-20
mA, 4-20 mA and +/-20 mA, respectively. This module has 16-bit ADC
converted to Floating Point or Integer.
Technical specifications for IC695ALG106
| Manufacturer | Emerson Automation |
|---|
| Series | PACSystem RX3i |
|---|
| Product Description | Analog input module |
|---|
| Manufacturer | GE Intelligent Platform (GE IP); Emerson Automation (Current) |
|---|
| Part Number | IC695ALG106 |
|---|
| No of Channels | Six (6) individually isolated channels |
|---|
| Part Number | IC695ALG106 |
|---|
| Product Type | Analog Input Module |
|---|
| Product Description | Analog input module |
|---|
| Number of Inputs | 6 |
|---|
| 0-20 mA; 4-20 mA; +/-20 mA; +/-10VDC; 0-10 VDC; +/-5VDC; 0-5 VDC
and 1 - 5 VDC | Input Data Format |
|---|
| Analog input signal | Voltage: +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V Current: 0-20
mA, 4-20 mA and +/-20 mA |
|---|
| Input Type | Current or Voltage |
|---|
| Configurable as floating point IEEE 32 bit or 16-bit integer in a
32-bit field | Channel update rate |
|---|
| Analog input resolution | 16-bits |
|---|
| Power | 24 Volts DC Isolated Voltage from an External Source |
|---|
| 1 ms | Digital Resolution |
|---|
| Data Format: | Floating point IEEE 32 bit or 16-bit integer in a 32-bit field |
|---|
| 16 bit | Filter options |
|---|
| Filter Options | 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, 1000Hz |
|---|
| Flash Memory | Supported |
|---|
| 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, 1000Hz | Open Circuit Detection time |
|---|
| Response times | 2 milliseconds (all four channels) |
|---|
| 1 Sec. | Overvoltage |
|---|
| Open Circuit Detection time | 1 second maximum |
|---|
| +/-35 VDC continuous, maximum | Overcurrent |
|---|
| Overvoltage | +/-35 VDC continuous, maximum |
|---|
| +/-35mA continuous, maximum | Calibration Interval |
|---|
| Overcurrent | +/-35mA continuous, maximum |
|---|
| 12 months | Current draw |
|---|
| Current consumption | 230 mA maximum @ 5.0V +5% / -2.5%, 320 mA maximum @ 3.3V +5% / -3% |
|---|
| 230 mA maximum @ 5.0V +5% / -2.5%; 320 mA maximum @ 3.3V +5% / -3% | |
|---|
| Product Lifecycle Status | Active |
|---|
The IC695ALG106 is a PACSYstem RX3i Programmable Automation
Controller (PAC), analog input module. This module is formerly
manufactured by GE Intelligent Platforms (GE IP), now under Emerson
Automation. This module features Six (6) isolated inputs
individually configurable to receive voltage and current signals
specifically, +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V and 0-20
mA, 4-20 mA and +/-20 mA, respectively. This module has 16 bit ADC
converted to Floating Point or Integer.
