Straw color wave Roof Tile Making Machine for Mgo / Mgcl / Fiber
Glass Mesh Raw Material
Mgo roofing tile forming Machine,mgo roofing tiles making machine
1. Introduction for roof tile machine:
Straw color wave roof tile forming machine can produce pantile with
all kinds of
waves and heat-preserving layer, which will be used at the roof as
the substitute
of traditional asbestos tile, color steel tile and cement tile.
There is asbestos in the
asbestos tile which include carcinogen.
Product features
The product manufactured by this equipment has following features:
fireproof,
waterproof, environmental protection and no toxicity, at the same
time it is
resistant against acid, alkali and aging. This product can be
nailed, planed,
sawed and sticked. In view of that its fireproofing grade is A, so
our product will
not be combustible when the fire is 800-1000°C.At the same time,
when our
product is fell into the water for a week, there are not the
following phenomenon
such as chalking, deformation and warp. In light of there is not
glue in the raw
materials, so there is not formaldehyde and benzene for our
boards.Rich color
and never fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high
pressure during
production processing. The board will be
formed at one time after rollerextruding under the conditions of
normal
temperature and normal pressure. This is a green
environmentalprotection project,
because that there is no waste water, waste materials and waste gas
during its
production processing. The finished board don’t need high
temperature drying,
airdrying and watering, and under the normal temperature, they will
dry well
indoor.
Product features:
The Mgo roofing tile manufactured by this equipment has following
features: fireproof, waterproof, environmental protection and no
toxicity, at the same time it is resistant against acid, alkali and
aging. This product can be nailed, planed, sawed and sticked. In
view of that its fireproofing grade is A, so our product will not
be combustible when the fire is 800-1000°C.At the same time, when
our product is fell into the water for a week, there are not the
following phenomenon such as chalking, deformation and warp. In
light of there is not glue in the raw materials, so there is not
formaldehyde and benzene for our boards.
Rich color and never fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding under the conditions of normal
temperature and normal pressure. This is a green
environmental-protection project, because that there is no waste
water, waste materials and waste gas during its production
processing. The finished board don’t need high temperature drying,
air-drying and watering, and under the normal temperature, they
will dry well indoor.
Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different
production.
Customers can adjust the specification of the pantile according to
different requirements, the standard specification is 1.8mX0.72m,
the biggest length is 6 m, the thickness is 3mm~6mm generally. In
addition, this equipment can produce the pantile with
heat-preserving layer.
Main characteristics
1. PLC computer control
2. no noise, no shake
3. hydraulic system
4. easy operation
5. maintenance free
Main equipment
1. Automatic bottom glue spraying equipment
2. Automatic sand blasting room
3. First drying room
4. Automatic surface glue spraying equipment
5. Second drying room equipment component
