XD-E Semi Automatic Fiber Cement Colour Glazed Profile Roof Tile
Making Machine
Fiber Cement Colour Glazed Profile Roof Tile Making Machine for
Bulding Construction
XD-E Semi Automatic Fiber Cement Colour Glazed Profile Roof Tile
Making Machine
1. Introduction for roof tile machine:
Straw color wave roof tile forming machine can produce pantile with
all kinds of waves and heat-preserving layer,
which will be used at the roof as the substitute of traditional
asbestos tile, color steel tile and cement tile. There is
asbestos in the asbestos tile which include carcinogen.
Product features
The product manufactured by this equipment has following features:
fireproof, waterproof, environmental
protection and no toxicity, at the same time it is resistant
against acid, alkali and aging. This product can be
nailed, planed, sawed and sticked. In view of that its fireproofing
grade is A, so our product will not be combustible
when the fire is 800-1000°C.At the same time, when our product is
fell into the water for a week, there are not
the following phenomenon such as chalking, deformation and warp. In
light of there is not glue in the raw
materials, so there is not formaldehyde and benzene for our boards.Rich color and never fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high
pressure during production processing. The
board will be
formed at one time after rollerextruding under the conditions of
normal temperature and normal pressure.
This is a green environmentalprotection project, because that there
is no waste water, waste materials and
waste gas during its production processing. The finished board
don’t need high temperature drying, airdrying
and watering, and under the normal temperature, they will dry well indoor.
Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and
smallscale. Our all equipment can produce board with same quality
and specification but different production.
Customers can adjust the specification of the pantile according to
different requirements, the standard specification
is 1.8mX0.72m, the biggest length is 6 m, the thickness is 3mm~6mm
generally. In addition, this equipment
can produce the pantile with
Equipment Model and Product Specification
According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different
production.
Customers can adjust the specification of the pantile according to
different requirements, the standard specification is 1.8mX0.72m,
the biggest length is 6 m, the thickness is 3mm~6mm generally. In
addition, this equipment can produce the pantile with
heat-preserving layer.
Machine Advantage
a.Water resistance: Without chalking for 24 hours and there is no change on surface
b.No “Three-wastes” (waste water, waste gas and waste residue), no pollution and environmental protection.
5 Our Factory
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology
enterprise registered at provincial industrial and commercial
department and a modern
group enterprise integrated with scientific research, processing
and trade mainly focus on
research, development and popularization of decorating technique,
building materials
technology and machinery. Its many patent products were sold
throughout China and some
were exported to Russia, Southeast Asia, Hong Kong and Taiwan. We
have had rich assets
and intellectual property rights after many years, and in July 2004, our products were
awarded as many laurels such as State Key New Product by State
Ministry of Science and
Technology, Ministry of Commerce, General Administration of Quality Supervision, Inspection
and Quarantine and State Environmental Protection Administration.
With this company
got much economic benefit and social benefit, so it enjoys high popularity and good credit
in the society.
