MTL5514 MTL Switch Proximity Detector Interface 10ms

MTL5514 MTL Switch/Proximity Detector Interface Response time 10ms maximum

The MTLx514 enables a safe–area load to be controlled, through a relay, by a proximity detector or switch located in a hazardous area. Line faults
are signalled through a separate relay and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection

• Number of channels

  One

• Location of switch

  Zone 0, IIC, T6 hazardous area

  Div.1, Group A, hazardous location

• Location of proximity detector

  Zone 0, IIC, T4–6 hazardous area, if suitably certified

  Div.1, Group A, hazardous location

• Hazardous–area inputs

  Inputs conforming to BS EN60947–5–6:2001 standards for

  proximity detectors (NAMUR)

• Voltage applied to sensor

  7 to 9V dc from 1kΩ ±10%

• Input/output characteristics

  Normal phase

  Outputs closed if input > 2.1mA (< 2kΩ in input circuit)

  Outputs open if input < 1.2mA (> 10kΩ in input circuit)

  Hysteresis: 200µA (650Ω) nominal

• Line fault detection (LFD) (when selected)

  User-selectable via switches on the side of the unit. Line faults

  are indicated by an LED. Line fault relay is energised and channel

  output relay de-energised if input line-fault detected

  Open-circuit alarm on if Iin < 50µA

  Open-circuit alarm off if Iin > 250µA

  Short-circuit alarm on if Rin < 100Ω

  Short-circuit alarm off if Rin > 360Ω

  Note: Resistors must be fitted when using the LFD facility with a contact input

  500Ω to 1kΩ in series with switch

  20kΩ to 25kΩ in parallel with switch

• Safe-area output

  Channel: Single pole relay with changeover contacts

  LFD: Single pole relay with changeover contacts

  Note: reactive loads must be adequately suppressed

Achievers Automation Limited

We are a global supplier of quality automation and control components, dedicated to meeting the industrial control needs of businesses worldwide.

• Over12 years of industry experience.
• Operates a full range of industrial automation components and instruments, cooperating with more than 20 brands,ALLEN BRADLEY,Bently Nevada,MTL,E+H,SICK,P+F,IFM and  more.
• These customers hail from over 45 countries across the globe, spanning different continents and diverse industrial landscapes.

Products cover oil development, natural gas development and refining, power plants, new energy, pharmaceutical plants and other industrial fields. Included flow meter,pressure tester,safety barriers,auto mation,valve control and Programmable Logic Controllers (PLC), Distributed Control Systems (DCS), Human Machine Interfaces (HMI), Measuring Instruments and other field instruments are part of the comprehensive product portfolio offered by Achievers Automation Limited to its customers.

Legal Disclaimer

https://www.achieversinstruments.com/ is not an authorized dealer, agent or associate of any of the designers, brands, or manufacturers that are offered in https://www.achieversinstruments.com/  All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the right of ownership. The use of trademark, brand name or product in our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All items are 100% authentic and legally purchased from authorized sources.