| Model: | (single-layer) |
| Box Size: | 690 * 210 * 65mm (single layer) |
| 690 * 370 * 65mm (double-layer) |
| 690 * 530 * 65mm (three layers) |
| Vertical pole size: | 1 2 00mm |
| Appearance material: | Aluminum alloy outer frame |
| illuminant: | red |
| Levels of Protection: | IP65 |
| Working Temperature: | - 40℃ ~ +85℃ |
| Working Voltage: | AC 110～240V |
| Power Dissipation: | 15 W (one-way) |
| Ambient Humidity | 90% RH (no condensation) |
| Communication Mode: | RS485 |
| Communication Distance: | ≤300m |
| Individual Digital Display Dimensions | 160*160 mm |
| P10 Module Size | 160*320mm |
Table 3.1 Technical Parameters Table of outdoor wired guide screen
Product Description
The outdoor guide screen, an integral part of parking lot
facilities, is installed precisely at the crucial fork roads within
the
parking lot. This screen is constructed with a high brightness P10
module, a reliable drive unit, a sturdy bracket, and other
essential components. Functionally, it interfaces with the outdoor
centralized controller to receive its output information.
Then, it presents the number of vacant parking spaces in the area
by using clear numbers and intuitive arrows. This effectively
guides car owners to promptly locate empty parking spaces, thereby
ensuring the orderly operation of the parking lot and
maximizing the utilization of parking spaces. Customized versions
including one-way, two-way, and three-way outdoor guide
screens are available to cater to specific requirements. 
Product features:
1) The guide screen adopts tempered glass panel + cold steel baking
paint shell, the appearance of simple atmosphere;
2) The shell adopts waterproof and dustproof design, and the use of
ultraviolet resistant paint, not easy to change color;
3) The guide screen has short circuit, overvoltage, overcurrent,
overload protection;
4) Red and green two color instructions can be clearly
recognizable, high luminous intensity, visible distance, can be
wide perspective.
Product installation
The outdoor wireless guide screen is installed in the column mode,
and the power cord is connected nearby and introduced into the
guide screen box. The installation diagram is shown in Figure 4.1:
Figure 4.1 Installation diagram of outdoor wired guide screen
