420 Stainless Steel Strips 2B BA Surface 2Cr13 SS Roll For Tools

420 stainless steel strip features
420 stainless steel is a martensitic stainless steel with the following characteristics:

• High hardness and wear resistance: Due to its high carbon content (0.15-0.40%), high hardness and wear resistance can be obtained after heat treatment.
• Corrosion resistance: It has good corrosion resistance in the general environment, but poor performance in strong corrosive environments (such as seawater or acidic media).
• Processing performance: hardness and strength can be adjusted by heat treatment, but cold processing performance is poor.
• Polishing performance: Smooth surface after polishing, suitable for decorative use.

Chemical composition (typical value) :

• Carbon (C) : 0.15-0.40%
• Silicon (Si) : ≤1.00%
• Manganese (Mn) : ≤1.00%
• Phosphorus (P) : ≤0.040%
• Sulfur (S) : ≤0.030%
• Chromium (Cr) : 12.0-14.0%

Mechanical properties (after heat treatment) :

• Tensile strength: ≥655 MPa
• Yield strength: ≥345 MPa
• Elongation: ≥12%
• Hardness: ≥50 HRC (after quenching and tempering)

Physical properties:

• Density: 7.75 g/cm³
• Melting point: 1450-1510℃
• Thermal expansion coefficient: 10.5μm /m·℃ (20-100℃)
• Thermal conductivity: 24.9W /m·K (100℃)

Specifications and common sizes
420 stainless steel tape has a wide range of specifications and sizes, and common sizes are as follows:

Thickness:

• Thin band: 0.03mm-1.0mm
• Thick belt: 1.0mm-5.0mm

Width:

• Narrow band: 10mm-300mm
• Broadband: 300mm-1000mm

Length: Usually in roll form, the length is customized according to customer requirements.

Application field
420 stainless steel tape because of its high hardness, wear resistance and corrosion resistance, widely used in the following fields:

• Tool Manufacturing:Kitchen knives, industrial knives, scissors, etc.
• Medical equipment:Scalpels, tweezers, dental instruments, etc.
• Mold Manufacturing:Plastic mold, die casting mold, etc.
• Automotive industry:High wear parts, fasteners, etc.
• Industrial Equipment:Pump shaft, valve parts, bearings, etc.
• Decoration Industry:After polishing, it is used for decorative strips, doorknobs, etc.

420 stainless steel belt is a high-carbon martensitic stainless steel with high hardness, wear resistance and good corrosion resistance, suitable for manufacturing tools, molds and medical equipment. Its specifications and sizes are flexible and diverse, and the appropriate heat treatment method and size specifications can be selected according to the specific application scenario.