JUYI Energy Efficient BLDC Motor Driver Board 12V 24V 48V With Brake Function

JUYI Energy-Efficient BLDC Motor Driver Board 12V 24V 48V with Brake Function

Application Fields

Remote-controlled electric vehicles, self-balancing scooters, remote-controlled wheelchairs, medical robots, recreational vehicles, robotics, etc.

Application Guidelines
1. Confirm the motor's voltage and power parameters. Do not exceed the specifications of the driver board.

2. The driver board is compatible with Hall-type three-phase brushless DC motors, but not all such motors can be used directly. Ensure the motor's Hall sensor angle is 120 degrees.

3. The JYQD_YL01D braking function is regenerative braking. Rotating motors during braking generate recoverable energy. Do not test the braking function with a regulated power supply, as this may cause damage.

4. The 5V output port on the driver board can provide <100mA current for microcontroller control.

5. Ensure proper insulation and heat dissipation for power components on the driver board during operation.

6. Safety startup function: After power-on, speed adjustment will be disabled until reset. To resolve, perform either a speed reset or brake reset.

Product diagram

Wiring Diagram

I. Control Port (Right Side) | 2.54mm Pitch
1. 5V – Internal 5V output from control board.

2. EL – Brake control port with reactive linear braking and energy recovery. Analog voltage braking range 0-5V: Higher voltage under constant RPM increases braking force (0-100% linear scaling).

3. M – RPM signal output port. Pulse frequency proportional to motor speed (pulse ratio varies by motor model).

4. Z/F – Forward/reverse control port. Hard commutation logic:
- Connect to 5V or leave floating → clockwise rotation
- Connect to GND → counterclockwise rotation

5. VR – Speed control port. Analog voltage regulation:
- 0-5V (effective range 0-2.5V) for linear speed scaling (low to high)
- Requires common ground with driver board for external PWM input

6. GND – Control board internal ground.

II. Power Port (Left Side) | 3.96mm Pitch
1. P+ – DC power input positive (12V-48V, supports lithium batteries)

2. P- – DC power input negative

3. MC/W – Motor phase wire W

4. MB/V – Motor phase wire V

5. MA/U – Motor phase wire U

6. GND – Hall sensor ground

7. HA/HB/HC – Hall sensor signal outputs

8. 5V – Hall sensor power supply

III. Critical Notes
1. Cable Length – Motor wires should not too long to prevent signal interference.
2. Thermal Management – For continuous high-current operation : When working with continuous high current, attention should be paid to heat dissipation

IV. Safety Compliance
- Do not reverse-polarity connect P+/P-
- Verify insulation resistance (>10MΩ) between power and control ports

Dimensional Drawing

Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, finance, trade, shipping, and technology innovation Center - Shanghai.

The company has strong technical and R&D strength. It is a  participant in many military projects and has in-depth cooperation with many domestic large-scale enterprises and government departments.

From its inception, JUYI Tech has always adhered to the principle of environmental protection and energy conservation, and established the business principles of honesty and integrity, bringing together elites in the industry, combining advanced electronic technology, management methods and corporate experience at home and abroad with the actual conditions of domestic companies to provide comprehensive services for enterprises.

The solution will help companies acquire more advanced product technologies and production capabilities, so that enterprises will remain competitive in the fierce market competition and achieve rapid and steady development of the company.

The company has a reasonable structure of talents, has many technical backbones, and has more than one master's degree, bachelor's highmiddle level technical titles. In order to develop intelligent and energy-saving electromechanical automation products that are truly suitable for business needs, the company has entered into cooperation with a foreign control chip manufacturer to customize the unique DC brushless control IC of JY series to provide customers with more flexibility, intelligence and stability. A more cost-effective brushless motor control solution.
 

With the best products, best service and best reputation, JUYI Tech products has been applied in the automobile,textile, packaging, printing, laser, food, woodworking, clothing, plastics, agricultural machinery, gardens, medical, experimental, robotics, military and other mechanical equipments. and achieved brilliant results, completed the supporting services of many large-scale enterprises, and are willing to become your most reliable long-term partner in future!

Contact us: