Product Usage:
Mainly used for purification of graphite powder and other high
temperature treatment. Its operating temperature can reach 2800℃,
and can work continuously for a long time. Good production
efficiency, energy saving. With on-line temperature measurement and
temperature control system, the temperature in the furnace can be
monitored in real time and adjusted automatically.
Product Features:
1, The use of temperature up to 2800 degrees, good temperature
uniformity, constant temperature area length, low failure rate of
equipment operation.
2, Long service life of furnace tube, continuous production 20-30
days .
3, With infrared temperature measurement and temperature control
system, real-time display and PID automatic control of the
temperature in the furnace, the product quality is stable. At the
same time to ensure the requirements of the product.
4, Adopt three-phase power supply mode, three-phase power balance,
stable performance. Unlike carbon tube furnace using single-phase
power supply, phase voltage imbalance, impact on the power grid,
affecting the operation of other equipment.
5, The use of common temperature, the temperature can reach 3000℃,
can work at 2600-2800℃ for a long time
6, The use of automatic feeding device, time control in and out of
the material, high degree of automation, low labor intensity of
workers, product high temperature treatment time is consistent.
7, The use of carbon felt as insulation material, no use of carbon
black, convenient replacement of carbon tube, while clean.
8, Using the push boat production mode, can stop the furnace
continuous production. Unlike the gap type (vertical furnace)
furnace, there is no need to stop every furnace, and wait for its
cooling to take out the material, low production efficiency, high
energy consumption.
9, The material is in the boat, the material will not appear
secondary pollution.
The product quantity of each boat is about 1.5 kg. The product
quality can be sampled and tested in time, and the process can be
modified according to the test results. No need to stop the
furnace, less waste of materials.
11, Short heating time, up to 200℃/ hour.
12, The furnace body sealing is good, small loss of protective gas.
All flanges and furnace covers are sealed with sealing strips.
13. The tank and flange of furnace body are made of stainless
steel, without rust and with long service life.
14, Equipped with a vacuum pump for the replacement of gas in the
furnace, short ventilation time, less gas consumption.
Main Technical Parameters :
| Model | JT-TGL-100 | JT-TGL-150 | JT-TGL-200 |
| Operating Temperature | ≤2400℃ |
| Boat Size(mm) | φ100*320 | φ150*400 | φ200*420 |
| Out Put (kg/d) | 100 | 150 | 200 |
| Protective Gas | Argon |
| Temperature Control Mode | PID Automatic control |
| Rated Power (kw ) | 80 | 150 | 180 |
| Voltage (V) | 380V Three Phrase |
| Temperature Measurement Mode | Far-infrared measurement |
| Working Mode | Push-boat type intermittent loading materials |
| Cooling Mode | Circulating Water Cooling |
