Product Introduction
Nanyang Jiading Material Co., Ltd. selects the optical-grade BOPET
polyester film treated by high temperature thermal setting as the
substrate, the material has high mechanical strength, stable
geometric size, good light transmission, environmental protection
and pollution-free. Both surfaces of the film are coated with a
water-resistant color laser printing toner receiving coating
composed of nano-scale water-soluble polymer materials, and the
surface of the film is white translucent matte. The ink absorption
speed is fast, the penetration effect is good, the imaging is
delicate, and the color restoration is high fidelity. The material
surface is white, the image details are fine, which is helpful for
image recognition; Waterproof, wear-resistant, suitable for various
occasions with strict requirements, easy to save; The pattern is
firm and scratch-resistant, does not drop ink, and the image shelf
life is decades; Suitable for pen writing, the doctor can sign the
film directly.
specification
| Type | Size | Size | sheet/box | boxes |
| Type | in | cm | sheet/box | boxes |
| L200 | 14*17 | 35*43 | 100 | 5 |
| L200 | 11*14 | 28*35 | 100 | 5 |
| L200 | 10*12 | 25*30 | 100 | 5 |
| L200 | 8*10 | 20*25 | 100 | 10 |
| Type | Size | Size | sheet/box | boxes |
| Type | in | cm | sheet/box | boxes |
| L500 | 14*17 | 35*43 | 100 | 5 |
| L500 | 11*14 | 28*35 | 100 | 5 |
| L500 | 10*12 | 25*30 | 100 | 5 |
| L200 | 8*10 | 20*25 | 100 | 5 |
During the use of medical film of Nanyang Jiuding Material Company,
the following precautions need to be paid attention to:
Environmental check: Ensure that the operating environment
temperature is between 15-25°C and the relative humidity is
maintained at 30-60%. Avoid placing the film in an environment with
high temperature, high humidity, direct sunlight or strong magnetic
field to prevent affecting the performance and image quality of the
film.
Equipment inspection: Before using medical film, check whether the
relevant printing equipment, imaging equipment, etc., is working
properly, and whether the transmission channel and imaging area are
clean, free of dust or impurities. If the device is abnormal, it
may affect the normal imaging of the film.
Personal protection: The operator should wear the necessary
protective equipment, such as gloves, etc., to prevent the sweat
and oil on the hand from contaminating the film. At the same time,
when carrying out radiation operations, you should do a good job of
radiation protection, such as wearing lead aprons, protective
glasses, etc.
Film inspection: Carefully check the appearance of the film before
use to see if there is damage, deformation, moisture, expiration
and other problems. Ensure the integrity and validity of the film
and avoid the use of defective film affecting the diagnosis.
