Aldult Outdoor Rental Inflatable Large Water Slides With Bouncy

Specifications:

Our Product's Quality Features

Reinforcement Belt: We apply double to four - fold stitches to make sure of the product's firmness and extend its service life.

Wind Ring: The metal ring situated at the bottom of the inflatable product is used for fixing the product and stopping it from swaying.

Air Outlet: Joined with a high - quality zipper cover, it is tightly sealed after inflation and is easy and quick for deflation when necessary.

Blower Pipe: A long PVC blower pipe is provided so as to ensure smooth air - blowing.

Safety Netting: Constructed from nylon rope in a certain way, it is robust enough to protect kids from dropping off.

Four - fold Black Reinforced Belt: It has more durability and a longer - lasting performance.

Perfect Double Stitching: Being strong enough, it can be used for more than 4 years.

High - Resolution Digital Printing: It provides patterns that are clear and vivid.

Dia. 8mm D - ring: It is more resistant to wear and rust - proof.

FAQ
Q: How to repair when damage?
A:
Step 1: Identify the Damage
Thoroughly inspect the inflatable to locate any tears, punctures, or leaks.
Step 2: Clean and Dry the Area
Clean the damaged area with mild soap and water to remove dirt or debris. Allow the area to dry completely before proceeding with the repair.

Step 3: Patch the Damage
Apply a patch specifically designed for inflatable repairs over the damaged area. Make sure the patch is slightly larger than the damaged area to ensure proper coverage. Press the patch firmly onto the surface, smoothing out any wrinkles or air bubbles.

Step 4: Apply Adhesive
If using a patch that requires adhesive, apply a thin, even layer of adhesive to both the patch and the inflatable surface. Allow the adhesive to become tacky before pressing the patch onto the surface.

Step 5: Allow Time to Cure/Allow the Adhesive to Dry
Once the patch is in place, you'll need to allow the adhesive to dry completely. This may take several hours, depending on the type of adhesive you are using. It's important to avoid using the inflatable until the adhesive is completely dry, as this could cause the patch to come loose. Wait at least 1 hour before inflating again.

Step 6: Test the Repair
Once the patch has cured, inflate the inflatable and check for any signs of leakage. If the repair holds, the inflatable is ready to be used again.

It's important to use repair materials specifically designed for inflatables and follow the manufacturer's instructions carefully to ensure a successful repair. If the damage is extensive or beyond your ability to repair, consider seeking professional assistance.

-
Q: Accessories included?
A: Free accessories include Storage Bag / Repair Kit / Warning Label / Custom Logo .