Product Description of IC695ALG616
The IC695ALG616 is an analog input module that is manufactured by
Emerson Automation, formerly by GE Intelligent Platforms (GE IP).
This module features may provide Sixteen (16) analog input channels
if configured as single-ended inputs or Eight (8) analog inputs for
differential wiring. It comes with a built-in Analog to Digital
Converter (ADC) with output conversion resolution of 24-bits. The
IC695ALG616 input channels is compatible of being wires with analog
current and voltage signals. Accepter Current signals by this
module include 0 to 20mA, 4 to 20mA, ± 20mA current signals and
±10V, 0 to 10V, ±5V, 0 to 5V, 1 to 5V voltage signals. The
converted analog data is saved as floating point 32-bit IEEE data
or 16-bit integer using a 32-bit register. Each channel of this
module has configurable channel filters to stabilize and minimize
fluctuation to become useful to the process. Configurable input
filters include 8Hz, 12Hz, 16Hz, 40Hz, 200Hz and 500Hz. Parameters
of this module are configured using the Proficy Machine Edition
(PME) programming software. No jumpers and DIP switches are needed
to dictate the operation of this module. Additionally, this module
is capable of performing autocalibration during every start-up.
Embedded module protections include Open circuit detection,
Overvoltage and Overcurrent protection. Aside from these protection
settings, each channels can be individually configured with alarm
settings, specifically, Very Low, Low, High and Very High alarms.
Positive and Negative rate of change may also be included into the
alarm features of this module while Module fault may also be
configured to be reported to the host CPU.
The GE Fanuc RX3i PacSystems IC695ALG616 non-isolated differential
analog input module has a current range between -20 and 20
milliamps, 4 and 20 milliamps or 0 and 20 milliamps, and voltage
range of 5 Volts DC, 0 to 5 Volts DC, 1 to 5 Volts DC, 0 to 10
Volts DC, or -10 to 10 Volts DC. The module has a Module OK LED to
display the operating status of the unit. The Field Status LED
shows if there are faults on at least one of the terminal blocks or
channel errors, while the Terminal Block or TB LED displays whether
the terminal block for the system is present or absent. All the
LEDs on the IC695ALG616 non-isolated differential analog input
module obtain their power supply from the backplane power bus. The
GE Fanuc IC695ALG616 analog input module has features such as rate
of change alarms, onboard error verification, channel fault alarms,
fault reporting, auto-calibration, a flash memory slot,
configurable offsets and scaling for each channel, and detection of
whether terminal blocks have been inserted or removed. The GE Fanuc
IC695ALG616 analog input module has a storage temperature range -40
to 185 degrees Fahrenheit and operating temperature range of 32 to
140 degrees Fahrenheit. This module requires a non-condensing and
relative humidity level ranging from 5 percent to 95 percent. It
has a vibration rating of 10 to 57 Hertz, 0.0524 millimeters (0.006
inches) displacement peak as per the JISC0911 and IEC60068-2-6
international standards and a vibration resistance rating of 15 G
at 11 milliseconds as per the JISC0912 and IEC60068-2-27
international standards.
Technical specifications for IC695ALG616
| Brand | GE Fanuc |
|---|
| Series | PACSystem RX3i |
|---|
| Manufacturer | Emerson Automation |
|---|
| Part Number | IC695ALG616 |
|---|
| Product Description | Non-isolated analog input module |
|---|
| Module Type | Analog Input |
|---|
| No of Channels | Sixteen (16) single-ended; Eight (8) differential inputs |
|---|
| Number of Inputs | 16 single-ended or 8 differential Inputs Channels |
|---|
| Input signals, Current | 0-20 mA; 4-20 mA; +/-20 mA; |
|---|
| Internal Power | 3.3V at 450mA, 5V at 600mA |
|---|
| Input signals, Voltage | +/- 50 mV; +/- 150 mV; +/-10VDC; 0-10 VDC; +/-5VDC; 0-5 VDC and 1 -
5 VDC |
|---|
| Voltage Range | +/-10V DC, 0 to 10V DC, +/-5V DC, 0 to 5V DC, 1 to 5V DC |
|---|
| Configurable Input Filter | 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, 500 Hz |
|---|
| Current Range | 0 to 20mA, 4 to 20mA, +/-20mA |
|---|
| Module resolution | 24-bit ADC converted to Floating Point or Integer |
|---|
| Operating Temperature | 32 to 140 degrees Fahrenheit |
|---|
| Input Data Format | Configurable as floating point IEEE 32-bit or 16-bit integer in a
32-bit field |
|---|
| Storage Temperature | -40 to 185 degrees Fahrenheit |
|---|
| Overvoltage | ±60 VDC continuous, maximum |
|---|
| Humidity | 5 to 95%, non-condensing |
|---|
| Overcurrent | ±28mA continuous, maximum |
|---|
| Open Circuit Detection time | 1 second maximum |
|---|
| Input Impedance | >100 k? voltage inputs |
|---|
| Current Input Resistance | 249 ? ±1% |
|---|
| Autocalibration | Performed during power-up |
|---|
The IC695ALG616 is a PACSystem RX3i Programmable Automation
Controller (PAC) non-isolated analog Input module formerly
manufactured by GE Intelligent Platforms (GE IP) now under Emerson
Automation. This module has Sixteen (16) single ended inputs or
Eight (8) Differential input channels compatible for 0 to 20mA, 4
to 20mA, ± 20mA current signals and ±10V, 0 to 10V, ±5V, 0 to 5V, 1
to 5V voltage signals. This module is installed to an RX3i
universal backplane and has 24-bit ADC conversion resolution.
