Robust IP67 waterproof 8 port gigabit Industrial Ethernet Switch
managed M12 Railway ethernet switch
Introduction of 8 port IP67 ethernet switch
IM-WS080WGM series is the 10/100/1000 Mbps waterproof M12 switch,
operating temperature -40 ℃ to + 75 ℃, support web management, meet IP67 protection degree and EMC industrial grade
requirements,pass through dangerous environmental certification and comply with FCC and CE standards. The reliable waterproof
industrial design could ensure continuous and stable operation of
the automation system.
Specification of Industrial Full Gigabit Switch
| Product Name | 10/100/1000Mbps Managed Industrial Waterproof Switch (8TP) |
| Model No. | IM-WS080WGM |
| Port | 8 x 10/100/1000M M12 network ports , M12(Female), 8-Pin A-Code,
Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X
Autotunning |
| Standard | IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1Q VLAN
Tagging, IEEE 802.1p CoS, IEEE 802.1X Authentication, IEEE 802.3ad
Link Aggregation Protocol: IGMPv1/v2, SNMPv1/v2 DHCP ClientTFTP,
HTTP, HTTPS, Telnet, Syslog SSH, SNMP Inform, DDM, Ping/tracert
detection, MIB library: MIB-II, Ethernet-Like MIB, |
| Managed | ☆ Jumbo frame processing: 9k ☆ Report buffer: 64K ☆ Broadcast storm suppression: support broadcast, multicast,
unknown unicast suppression ☆ Flow control: Adopt IEEE802.3x negotiation flow control, CAR
function, speed limit step size is 1Kb ☆ ITU-802.3/Y1344 ERPS ☆ Multicast protocol: IGMP Snooping ☆ Port management: support port isolation and port aggregation ☆ DHCP management: support DHCP Snooping, option 82 ☆ QoS mechanism: 802.1p; support port default priority marking,
each port has at least 4 queues with different priorities ☆ Security: login access authentication, login password
modification, MAC address filtering, support dynamic or static MAC
address learning / support ARP learning function off and on, ARP
message speed limit / support IP+MAC+ port manual and automatic
scanning binding Set IEEE 802.1x (Port based, MAC based), can
transparently transmit 802.1x data packets/port loop detection |
| Switching Features | Exchange capacity: 20Gbps Packet forwarding rate: 14.8Mpps MAC address table: 4K Swap delay: <5μs Transmission method: store and forward |
| Power supply | Input voltage:DC12-52V Reverse connection: support Overload protection: support Redundant protection: support |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C; Working humidity:5%～95%, non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN
61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6
(CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN
50121-4 |
| Mechanical information | Safety class:IP67 Dimension:125 x 60x 25mm. Weight: 0.5kg |
| Warranty | 3years |
Key Features of Managed Function
- Support IEEE802.3az EEE (Energy Efficient Ethernet) Management,
optimize power consumption
- Support ITU-802.3/Y1344 ERPS ring protocol.
- Support SNMPv1, v2Web management, support user login password
protection and other device configuration methods
- Support 9k Jumbo frame, MAC restriction
- Support VLAN: support port VLAN and 802.1Q Tag
- Support QoS priority, DSCP remapping, Priority and Queue Mapping,
Port Priority, Q queue weight
- Support IGMP port bandwidth control, broadcast storm suppression
- Support Port Aggregation, Port Mirroring, Port isolation, Bandwidth
control
- Support MIB library opening to meet the requirements of operation
and maintenance
- Support WEB, CLI, Telnet, Windows utility and SNMP management
methods
- Reset: Support restart and restore default configuration
Application of IP67 Waterproof switch:
Accessories
| Power Cable and Connector |
| M12 L-code 4pin, 10A max, female connector with cable, Length:1m |
| M12 L-code 4pin, 10A max, dual connectors female-male connector
with cable, Length:1m |
| M12 L-code 4pin, 10A max, female connector, unshielded TPU casing |
| M12 L-code 4pin, 10A max, male connector, unshielded TPU casing |
| Signal Cable and Connector |
| M12 A-code 8pin, male connector with cable, Length:1m |
| M12 A-code 8pin, male connector with cable, Length:1m |
| M12 B-code 8pin, male connector with cable, Length:1m |
| M12 B-code 8pin, male connector with cable, Length:1m |
FAQ:
1.Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production
area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
2.What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock.
After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working
days for less than 50pcs/pairs.
3. What is your payment terms?
In most cases we do T/T wire transfer and full amount should be
collected before shipment.
For sample orders, we receive PayPal payment for shorter processing
time.
Sometimes Alipay or WeChat payment is fine, it depends on the
cases.
4. If possible to write the label as I want?
A: Yes, please just send the content and format, and we will print
a sample piece for your confirmation.
The label is usually attached to the side panel.
5. Can I have my own packing box?
Yes, the standard packing box does have not have Chinese letters or
logo.
Its fine to customize your own version like putting your logo,
model name or slogans on it.
