1.Suitable density: The general density is around 1.0 - 1.2g/cm³, which not only ensures that the sealant
has sufficient weight to fill the gap, but does not cause additional burden on the bonded object due to
excessive weight.
2.High expansion rate: It has a high expansion rate, generally reaching 20% - 50%, and can adapt to the
greater expansion and deformation of the adhesive under different environmental conditions.
3.Excellent aging resistance: After artificial accelerated aging tests, such as ultraviolet irradiation, humidity
and heat aging, etc., after thousands of hours, its physical and sealing properties can still be maintained at
more than 80% of the initial performance, and its service life is long
Features:
1.Good extrusion and easy to construct. The sealant can be easily extruded to the parts that need to be
sealed through tools such as glue guns. The construction process is simple and does not require special
construction equipment and professional technical personnel.
2.Some acidic silicone sealant has good transparency, is almost colorless and transparent after curing, and
will not affect the appearance of the adhesive, and has a certain decorative effect.
3.It is often used for sealing glass doors and windows, glass partitions, etc., which can not only achieve
good sealing performance, but also maintain the transparency and aesthetics of glass.
Safety Instructions:
1. The workplace should pay attention to maintain good ventilation.
2. Before curing should avoid contact with eyes, please rinse with plenty of water, then ask the doctor to
check.
3. After fully cured, the product will not release harmful substances nor cause damage to the skin.
4. Before using this product, users must carry on the compatibility and bonding test first, confirm the
product and substrate can meet construction requirements.
Application:
1)As an elastic sealant for movement jointsePrecast concrete construction
Balcony parapetsBridge cantilevers.
Retaining walls.
2)As an elastic joint sealer/caulking for:Window frames and doors.
Skirtings.
Wall/floor joints
Shutter housings
Warnings:
1. Use in a well-ventilated environment.
2. Use solvents in accordance with the appropriate safety regulations.
3. Keep the product out of the reach of children.
4. If uncured sealant melts your eyes, wash them immediately with water or seek medical attention.
