Ei 42 0.35mm EI Transformer Lamination Silicon Steel Electrical Steel Sheets T4 Coating
|
EI-42 TRANSFORMER LAMINATION SILICON STEEL ELECTRICAL STEEL SHEETS With a leading name in EI Lamination Core industry, we provide you with best quality products for all types of requirements. Introduction: Single phase EI core is made by the silicon steel ......
Jiangyin Centersky Electric Appliance Co., Ltd.
|
Coated 0.35mm ei transformer laminations
|
...rolling, small difference in thickness in a direction perpendicular to the direction of rolling, and high lamination factor. Processing Properties The product is suitable for punching and cutting with excellent dimensional tolerance. Insulation Coating The...
Jiangyin Hengtong Electrical Equipment Co., Ltd
|
0.03/0.05mm Thickness EI Lamination Cold-rolled Grain-oriented Silicon Steel Strip/Coil for Pulse Transformer Grade SGCC
|
#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:421px;margin-top:0;margin-bottom:0;margin-left:0;margin-right:0}#detail_decorate_root .magic-2{margin-top:0;margin-left:0;width:750px;height:421px......
Shandong Lubao Metal Group Co., Ltd.
|
Ei Silicon Steel Transformer 0.5mm Laminated Steel Core
|
... No. ei70 Material non oriented silicon electrical steel Component content silicon Processing methord cold rolled Specification thickness: 0.35mm----0.5mm Frequency 50Hz---60Hz Application control transformer,...
DZ Iron Steel Group
|
EI35 Power Transformer with Wire , Electrical Power Supply Voltage Transformer
|
...Transformer with Wire Electrical Power Supply Voltage Transformer 1.Product Description The EI35 power transformer is a compact laminated core transformer commonly used in low to medium power applications (typically 5-50VA). Its "EI" name derives from the stacked E-shaped and I-shaped silicon steel laminations that form its magnetic core, with "35" indicating the approximate 35mm width of the center leg. This cost-effective transformer...
Shenzhen Zhixiangyuan Electronics Co., Ltd.
|
B35a440 Cold Rolled Non-Oriented Silicon Steel 0.1mm 0.2mm 0.35mm Silicon Steel
|
...35mm silicon steel B35A440 cold rolled steel sheet is made from hot rolled steel coil, which is rolled at room temperature below the recrystallization temperature. The thickness of cold rolled steel sheet is generally between 0.1 and 8.0mm. Product Name Electrical Steel, Lamination Steel, Silicon Electrical Steel, Silicon Steel, Relay Steel, Transformer......
Gnee Steel (tianjin) Co., Ltd.
|
Non Orient Silicon Steel Coils Electrical Crngo For Lamination Motors
|
...Lamination Motors Specification Product Name Cold Rolled Grain NON-Oriented Silicon Steel Standard B23G110, B27G120, B35G155, B23R080-B27R095 Thickness 0.23mm-0.35mm Width 20mm-1250mm Length Coil Or As Required Technique Cold Rolled Surface Treatment Coated Application Widely used in transformers......
Jiangsu Taigang Puxin Stainless Steel Co., Ltd.
|
Submit your “0 35mm thickness ei transformer lamination” inquiry in a minute :