Thickness Gauge 2mhz 10mm Ultrasonic Testing Probe
|
5M/10mm TS210 Probe for Ultrasonic thickness gauge Model: TS210 Frequency:2MHz Crystal Diameter:10mm Measurement Range:2.0 to 250mm Temperature Range: -10 to 70℃ Applicaiton: use for all Ultrasonic thickness gauge...
TMTeck Instrument Co., Ltd
|
GE IC9-RS Endocavity Ultrasound Transducer Probe Ultrasonic Testing Probes Repair Crtstal
|
...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days warranty Knowledge Point The IC9-RS Real-time 2D Endocavitary Probe......
Guangzhou Rongtao Medical Tech LTD.
|
Normal Beam Straight Ultrasonic Probe , ultrasonic testing probes
|
... angle probes,four-crystal probes,immersion focusing probes and othe conventinal probes. Character: (1) General application, metal parts with simple structure. (2) Plank stuff, large forgings, blank, castings detection. Funtion: (1) Probes bottom with...
HUATEC GROUP CORPORATION
|
IEC61032 IEC60529 IP3X Test Probe C
|
...proceed protecting electric shock test of domestic and similar electrical appliances. Technical parameters 1, Test Probe Length :100mm 2, Test Probe Diameter:2.5mm 3, Dam- sphere Diameter:35mm 4, Handle Diameter:10mm 5, Handle Length 100mm 6, According to...
HongKong Bonad Technology Limited
|
Test Probe D, IEC60529 Test Wire 1.0mm, IP4X
|
...appliance of against electric shock protection test. Technical parameters 1, Test Probe Length :100mm 2, Test Probe Diameter:1.0mm 3,Dam- sphere Diameter:35mm 4,Handle Diameter:10mm 5,Handle Length 100mm 6, According to IEC61032 figure 4 (the Test probe D)...
KingPo Technology Development Limited
|
Seamless Tube Ultrasonic Testing Equipment
|
...Ultrasonic Testing System Introduction This system is used for Gas Cylinder testing , generally test longitudinal defects , transverse defects and wall thickness of the main gas cylinder tube and both carved sides . Testing speed : 0-8m/min Testing model : Gantry ultrasonic testing , Gas Cylinder rotated ,probes move and scan right and left Testing object: High pressure gas cylinder tube Testing......
XIAMEN COBE NDT TECHNOLOGY CO.,LTD
|
Standard Ultrasonic Thickness Probe Probe Small Diameter Probe High Performance
|
...PT-5 (Standard) 5MHz 10mm 0.8~300.0mm For standard applications XT-5 (Optional) 5MHz 7mm 0.8~30mm For tubes with small diameter GT-5 (Optional) 5MHz ......
SINO AGE DEVELOPMENT TECHNOLOGY, LTD.
|
350mm Digital Ultrasonic Testing Thickness Measurement Built In Thermal Printer
|
... printer. ● with 2 probes (Standard probe and Angle probe) and 4 steps calibration block . ● Rechargeable Li-ion battery, available for 10 hours measuring continuously. ● Two display units: mm and ......
Chongqing Leeb Instrument Co.,Ltd
|
Diameter 50mm Test Probe A Made Of Stainless Steel And Nylon , Accord With IEC60529 IP1
|
... baffle and handle made of nylon. The diameter of sphere is 50mm. Baffle diameter is 45mm. Baffle thickness is 4 mm. Handle diameter is 10mm. Handle length is 100mm. It has no force, but there is an M6 threaded hole at the end of the handle to connect the...
Guangzhou HongCe Equipment Co., Ltd.
|
Small Medical Equipment Accessories , Edan US Ultrasonic US Probe And TOCO External Contractive Pressure Probe
|
... will undergo: • Testing upon arrival • Exterior cleaning • Replacement of any broken or missing accessories • Professional diagnosis • Repair (if needed) • Calibration • Final testing and approval Our engineer have ten years experience in...
Guangzhou YIGU Medical Equipment Service Co.,Ltd
|