1400 MPa Heavy Tungsten Alloy Syringes For Medical Use
|
..., molybdenum, chromium and other elements. The density of super gravity tungsten alloy is up to 15.20~18.70g/cm3, also known as super gravity tungsten alloy or high density alloy material. Because tungsten alloys weigh more than twice as much as steel....
JINXING MATECH CO LTD
|
Tungsten alloy swaged rod
|
...Tungsten Alloy swaged rod The normal tungsten alloy rod after swaging, ultimate tensile strength and hardness would be increased greatly. The ultimate tensile strength of general tungsten alloy rod is 920 MPa, hardness is 25HRC. However, after swaging, the ultimate tensile strength can reach 1200 MPa, hardness is 35HRC. We could even control at 1400 MPa......
Mudanjiang North Alloy Tools Co., Ltd.
|
ASTM B365 Standard Tantalum Tungsten Alloy Sheet Foil For Industrial
|
... Standard ASTM B365 Size customizable Application Industrial, Electronic, Medical Grade(UNS) Annealed Tensile strength min, psi (MPa) Yield strength min,psi (MPa)(2%) Elongation min, % (1 inch gage length) Pure Ta (RO5200, RO5400) 30000 (207)...
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
High Heat Resistance Copper Tungsten Alloy Cu25W75 Plate With Density 14.8g/Cm3
|
High Heat Resistance Copper Tungsten Alloy Cu25W75 Plate with Density of 14.8g/cm3 Tungsten Copper Alloy types,chemical compositions and main properties: Grade Density: g/cm3 Tensile Strength/Mpa Hardness (HB) Conductivity %IACS Main Applications Room ......
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
Different Specification Silver Tungsten Alloy Blank Coin For Cutting Metals Materials
|
The specification of sliver tungsten electrodes can be clarified by the content of tungsten and silver. There are AgW30, AgW40, AgW50, AgW55, AgW60, AgW65, AgW70, AgW75, AgW80, and AgW85. Brand and NO. Chemical Components W% Physical Properties Ag W Total ......
Shenyang Top New Material Co.,Ltd
|
Ta-2.5W Ta-10W Tantalum Tungsten Alloy Plate For Heat Exchanger
|
...Tungsten Alloy plate Grade RO5252(Ta-2.5W), RO5255(Ta-10W) Thickness 0.07-10mm Width ≤800mm Length ≤3000mm Standard ASTM B708 Surface Bright and no scratches, dents, stains and other defects Delivery status Annealed Mechanical properties: Grade State Thickness(mm) Tensile Strength (MPa) Yield Strength (Mpa......
Shaanxi Peakrise Metal Co.,Ltd
|
90WNiFe 17g/Cm3 Metal Beads Tungsten Heavy Alloys
|
...tungsten heavy metal sheet tungsten heavy alloy plate for radiation Products tungsten heavy alloy detail: 1. Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3; 2. It has high tensile strength from 700 to 1000 MPa; tungsten heavy alloy 3. It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead; 4. WNiCu alloy......
Fonlink Photoelectric (Luoyang) Co., ltd
|
Electrical WCu Alloy Dics Ring Alloy Copper Tungsten For EDM Electrodes
|
...Tungsten Alloy Products WCu Alloy Dics & Ring WCu Alloy Dics & Ring used In electric resistance welding as electrical contacts or heat sinks. In electrodes for electrical discharge machining (EDM) and electrochemical machining (ECM). Parameters Class Chemical Composition (wt%) Density Hardness Resistivity IACS Bending Strength Cu Total Impurities≤ W g/cm3 ≥ HB Kgf/mm2 ≥ μΩ.cm ≤ % ≥ MPa......
Luoyang Hypersolid Metal Tech Co., Ltd
|
YG8 hard alloy Tungsten Carbide Saw Tips 1900 MPa for saw blade
|
...alloy Tungsten Carbide Saw Tips 1900 MPa for saw blade Description: 1, Used for steel, stainless steel, cast steel and cast iron cutting and processing. 2, Good toughness 3, Superior wear resistance & high strength 4, A comprehensive range of types with molds 5, Short deliver period,with some types always in stock 6, Full-automatic press machine,which brings stable quality and high efficiency Specifications: YG6 YG8 tungsten......
Zhuzhou Mingri Cemented Carbide Co., Ltd.
|
YG3 YG6 YG8 Tungsten Carbide Products Octagonal Column Inserts For Coaling / Milling
|
...Tungsten Carbide Buttons Octagonal Column Inserts For Coaling / Milling Type: Octagonal Column Inserts Material and technology: Tungsten Carbide in blanks; HIP sintering. Grade: YG3, etcs; Grade ISO Density Hardness T.R.S Applications recommended Code g/cm3 HRA MPa YG3 K05 15.1 92 1400......
Zhuzhou Weikeduo Cemented Carbide Co., Ltd.
|
Submit your “1400 mpa tungsten alloy syringes” inquiry in a minute :