BH420 Pneumatic Pipe Ramming Hammer Impact Force 800T 2.8m Long Yellow
|
... adaptability of formations, the equipment is simple, less investment, lower construction cost. Rammer is essentially a impactor with low frequency, large pneumatic hammer impact energy. It is a machine with the compressed air power to drive the...
Langfang Baiwei Drill Co., Ltd.
|
Strong Adaptability HDD Pipe Ramming Hammer Large Pneumatic Hammer Impact Energy
|
Air hammer, Pneumatic pipe hammer for pipelaying Pipelaying with pneumatic pipe hammer is widely adopted in the non-excavation construction owing to its features of simple construction technique high accuracy, fast speed and low cost. In the pipelay of ......
NANJING STETON ENGINEERING MACHINERY CO.,LTD
|
10Mn2 / 15Cr5Mo Seamless Line Pipe Cold Drawn Process For Liquid Transportation
|
...Pipes for Liquid Transportation Material: 10, 20, 35, 45, 10Mn2, 15Cr5Mo, 12Cr8, 20Cr, 40Cr Size Range: OD: 6-114mm, WT: 1-20mm, Length: 5.8m/6m, maximal 11.8m Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering......
NEW-ERA STEEL TUBE TECHNOLOGY CO.,LTD
|
Anti-Wearing 2.2m 1 Inch Hydraulic Industrial Hose Pipe
|
...Hammer Pipes In Large Stock Main technical parameters on Anti-Wearing Anti-High-Pressure Excavator Hammer Pipes High pressure soft hoses for HY135/140 excavator breaker hammer 1. Length: 2.2m/2.5m (according to actual situation) 2. Applicable wrench: 41 3. Interface thread:1 4. Soft hose diameter: 1inch High pressure soft hoses for HY155/165 excavator breaker hammer 1. Length: 2.8m......
Zhengzhou Hanyun Construction Machinery Co.,Ltd
|
GB/T3087 Q235 Carbon Seamless Steel Pipe For Low And Medium Pressure Boiler
|
...Pipe For Low And Medium Pressure Boiler Steel Grade/Steel Material:Q345 Q195 10# 20# Steel pipe standard:GB/T3087 Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Size Range: OD:4-1200mm WT:0.5-200mm Length: 5.8m, 6m, 11.8m, 12m, or as required. Production Processs: RAW MATERIAL ↓ INCOMING INSPECTION ↓ STORAGE → CUTTING→HAMMERING...
TORICH INTERNATIONAL LIMITED
|
Submit your “2 8m pipe ramming hammer” inquiry in a minute :