40GHz 2W 2.92 Male RF Dummy Load For Indoor Outdoor
|
... 2.92 Male RF Dummy Load Better heating shrink Wide band Good VSWR Part Number VN-DL-40G-2W-2.92M Operating Frequency DC-40GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 2W Interface 2.92 Male ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
40GHz 2W 2.92 Male RF Dummy Load For Indoor Outdoor
|
|
40GHz 2W 2.92 Male RF Dummy Load Part Number VN-DL-40G-2W-2.92M Operating Frequency DC-40GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) 2W Interface 2.92 Male Operating Temperature ( ℃ ) -55~+......
HeFei Vinncom Science And Technology Co.,LTD
|
Capacity 350-6000MHz N Male RF Dummy Load 100W Termination Load for Ibs/Das Projects
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
...RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male......
SHENZHEN ZD TECH CO., LTD
|
F Male Terminator, RF Dummy Load
|
F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ......
Changzhou H .N . Electronic Co., Ltd.,
|
100 Watt RF High Power Dummy Load Din Male Connector 160dBc PIM VSWR 1.2 IP 67
|
...RF Load Dummy Load 4.3 - 10 or Din Male Connector 160dBc PIM Description: 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm 4. IP 67 , outsider , good waterproof. 5. Connector :4.3-10 male Specification: Type No. Load......
Lenolink Telecommunication Co.,Ltd
|
0.5watt RF Coaxial Connector SMP Dummy Load Terminator 40GHz 50Ohm
|
...Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50Ω, including SMA, SSMA, SMP, SSMP, CSMP, N, TNC, K2.92mm and other male......
Xi'an Elite Electronic Industry Co., Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|
Brass 2 Watt RF Load Termination 18GHz Dummy Load 50 Ohm
|
2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical Specifications Frequency Range DC – 18GHz Power 2W CW at 25°C (Derated linearly......
Chengdu Zysen Technology Co., Ltd.
|
Submit your “2 92 male rf dummy load” inquiry in a minute :