200tph walking beam type reheating furnace

...; the blank is spread out at intervals at the bottom of the furnace or on the beam, which can be heated evenly faster. The fault of arch steel and sticking steel of pusher-type heating furnace is completely eliminated, so that the length of furnace is...

1. Working Procedures of the production line : ﹡Cylinders are loaded at transfer roller; ﹡Cylinders are transferred onto loading table; and charged inside of hardening furnace chamber from one end of furnace door; ﹡Cylinders are horizontally heated inside......

...furnace body:　 This walking beam type furnace is installed in one line. Shell and framework are made of steel plate and formed steel. Furnace body is supported in a certain height by column and rack, so that furnace can run in stable and reliable condition, shell is made of A3,δ4mm steel plates which are welded with furnace channel steel. Furnace......

... rounds, or billets, being cut to a specified length and sent through a walking-beam reheat furnace, where temperatures reach nearly 2,300°F. After exiting the reheat furnace, the preheated rounds are turned into a tube shell in the rotary piercing mill......