Wedge probe | 30 / 30 / 40mm Knurled Length Wedge probe IEC62368-1-Figure V.4
|
Wedge probe IEC62368-1-Figure V.4 Reference Standard: IEC62368-1-Figure V.4 Calibration Certificate:Figure V.4 Wedge probe.pdf Technical Parameters: Test finger length 234mm Knurled length 30/30/40mm Material stainless steel and nylon Reference IEC62368,......
KingPo Technology Development Limited
|
IEC 62368-1 Figure V4 Test Finger Probe Wedge Probe For Testing Document Shredders
|
... to the opening: − with a force up to 45 N for a strip-cut type device; and − with a force up to 90 N for a cross-cut type device. Test Finger Probe NOTE Media destruction devices are typically identified as either...
Guangzhou HongCe Equipment Co., Ltd.
|
Metal Material Test Probe Kits Wedge Probe Jointed / Rigid Test Finger IEC60950-1
|
... Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of IEC60950-1, includes jointed test finger, test pin, unjointed test finger, TNV test probe and wedge probe, they......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60950-1 Figure EE.1 Figure EE.2 Wedge Probe For Testing Document Shredders
|
...Wedge Probe for Testing Document Shredders Product Overview: This wedge probe meets the requirements of IEC 60950-1 Figure EE.1 and Figure EE.2, clause EE.5, it is used to check the protection against hazardous moving parts. The force is achieved by working with a force gauge, there is a M6 thread hole on the handle of probe which can match a force gauge. Application: The wedge probe......
Sinuo Testing Equipment Co. , Limited
|
IEC 60950-1 Fig NAF.2(S5366) Wedge Probe For Testing Document Shredders
|
...wedge probe is a new accessibility probe required by the standard of IEC 60950-1 Fig NAF.2(S5366) and NAF.3(S5370) as well as BS 60950.1108/260/CD for paper shredders. It is used to test whether the hazardous parts of shredder can be touched by people. The probe......
Dongguan Kingpo Technology Limited
|
High Temperature Wedge / Probe Shoe Of DA Series Replacement Delay Lines Dual Probes One Pair
|
High temperature wedge/ probe shoe of DA series dual probes one pair...
TMTeck Instrument Co., Ltd
|
UL60950 Jointed Accessibility Wedge Probe
|
Household and home/office document/media shredders UL 60950 Wedge Probe for Paper Shredders 1. Specification: Length: 300 mm Bent finger diameter: 12 mm Bendable Section: 30/30/......
HK LEE HING INDUSTRY CO., LIMITED
|
UL Standard 234mm Articulated Probe
|
...,UL1278,UL1062,UL1310,UL474,UL60065 The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2,...
Guangzhou Shice Equipment Co., Ltd.
|
Short test pin probe,test probe iec 61032,test probe,test finger probe
|
... of stainless steel with a plastic handle. Meets IEC 60950 and 61032, Figure 9 (Test Probe} Model TP12 Short Test Pin Probe Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is plastic, tip is stainless steel....
ALLIED TESTING (HK) CO.,LTD.
|
Wedge-Shaped Test Finger Probe for Document Shredder Safety | IEC 61032 & EN 60950 Compliance Testing Tool – Precision Stainless Steel Probe 25mm × 80mm
|
... if office gadgets are safe, like paper shredders and printers, you gotta look at everything. Our Wedge-Shaped Test Finger Probe (Model HT-U14) is made to be super exact and last long. It's built to act like a human finger touching these machines, so...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|