Standard Test Finger Probe with 30±0.2 Jointed Point 80±0.2 Length and 180±0.2 Fingertip to Baffle for Accessibility Testing
|
Standard Test Finger for Accessiblity Test 1. Introduction Standard test finger also be called as jointed test finger and test probe B, it is applied to simulate the human finger to verify the accessbility to hazardous parts of electrical and electronic ......
Pego Electronics (Yi Chun) Company Limited
|
UL Standard Articulated Jointed Test Finger Probe For Preventing The Finger From Approaching To The Hazardous Parts
|
... Articulated Jointed Test Finger For Preventing The Finger From Approaching To The Hazardous Parts Test Finger Length: 234mm The Bending Part Length: 30/30/40mm The UL Articulated Finger Probe is a standard articulated finger as required by Underwriters......
KingPo Technology Development Limited
|
IEC 61032 Figure 12 Test Probe 18 Ф8.6mm Children Finger Probe
|
IEC 61032 Figure 12 Test Probe 18 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of more......
Sinuo Testing Equipment Co. , Limited
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
UL Standard 234mm Articulated Probe
|
...,UL1278,UL1062,UL1310,UL474,UL60065 The UL accessibility probe is also called UL articulated probe or jointed test finger probe. It conforms to many standard requirement of UL474 Fig 5.1, UL507 Fig 9.2(PA100A), UL982 Fig 7.1, UL1017 Fig 2, UL1062 Fig1.2,...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60529 Probe Test B with 10N Force
|
Jointed IEC Test Finger with 10 Thrust Force Level: 10N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Length: 30.5 cm Knurled Finger Diameter: 12 mm Knurled Finger Length: 8 cm Handle diameter: 4.5 cm Handle length: 9.5 cm Application: 1. The joint...
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “30 0 2 jointed point test finger probe” inquiry in a minute :