Cnc Machine Tools Carbide Milling Cutter HRC50 2 Flutes End Mill
|
...: tungsten carbide b, TRS: >3600 N/mm2 c, HRA: 91.8-92.4, HRC:45/55/60/65 d, Grain size: 0.2-0.6μm e, Helix angle: 30°-45 ° Diameter of ......
JYC technology Co.,Ltd
|
Carbide Multi Flutes End Mills / Tungsten Carbide Milling Cutters
|
Carbide Multi Flutes End Mills / Tungsten Carbide Milling Cutters 1. Super-Fine Micrograin carbide rod: WC=92.5%, Co=12.5%, TRS>4200N/mm2; Hardness>92.5HRA, Grain size: 0.5um; High qulaity of wearability and impact 2. Made by world latest 5-AXIS tools grinding machine, promise the quality and precision of cutter. 3. Super TiAlN, reduce the coeffiction of friction, and improve the tools life much. 4. Each end mill......
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.
|
Straight Shank Carbide Milling Cutter Cobalt End Mill Four Flute End Mill
|
... tolerance extent control. We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide rod can ensure the...
Dongguan Diamond Hardware Factory
|
HRC55 Carbide Milling Cutter Square End Mill With 30° - 45 ° Helix Angle
|
HRC55 Carbide Milling Cutter,Dovetail end mill cutter,Square End Mill 1.Original raw micro grain material, high hardness and T.R.S. a, Material: tungsten carbide b, TRS: >3600 N/mm2 c, HRA: 91.8-92.4, HRC:45/55/60/65 d, Grain size: 0.2-0.6μm e, Helix angle......
INMIND TOOLS CO.LTD
|
yellow Cemented Carbide Milling Cutters Rods DURANA coating
|
GRADES OF CEMENTED CARBIDE RODS AND BARS ISO CORRESPONDING WC% Co% Density g/cm3 Hardness HRA TRS N/mm2 WC grain size K10 94 6 14.90 92.5 >=3000 FINE GRAIN K05-K10 94 6 14.85 93.0 >=3500 ULTRA-FINE GRAIN K20-K30 92 8 14.65 92.6 >=3600 ULTRA-FINE GRAIN K30-......
Zhuzhou Aohua Tools Co.,Ltd.
|
CNC Cutting 3 Flute Carbide End Mills , Tungsten Carbide Milling Cutters
|
CNC Cutting Tungsten Carbide Endmills with 3 Flutes Cutters Features: 1. Raw Material: Ultra Fine Micro grain with Diameter less than 0.4UM 2. Chemical Composition 6%-12% Cobalt 3. Strength 2500-4000N/mm2 Controlling Mode CNC 4. Density14.45-14.90g/cm3 5. ......
ZHUZHOU SEEGO CARBIDE TOOLS CO., LTD.
|
Aluminum Machining Flat End Mill / 2 Flutes Solid Carbide Milling Cutters D1-D12
|
1. Super Raw Material HRC45 HRC55 HRC60 HRC65 YG10X YG10.2 &WF25(Taiwan) K44 & K40 (German) H10F (Sweden) Grain Size:0.7um Co:10 % Flexural strength:3320N/mm2 Grain Size:0.6um Co:10 % Flexural strength:4000N/mm2 Grain Size:0.5um Co:12 % Flexural strength:......
Supal (Changzhou) Precision Tools Co.,Ltd
|
RDMT 1204 Indexable Milling Inserts Tungsten Round Carbide Milling Cutter Insert
|
Quick Detail High efficiency Good red hardness Low friction coefficient Excellent performance High speed cutting Description RDMT1204 adopts a unique design of the blade edge made in Germany, with nano coating. The blade has smooth chip removal, higher ......
Shenzhen Bwin Precision Tools Co., Ltd.
|
NACo4 Blue 3.0mm Flat End Mill Cutter For Titanium Alloy
|
... Solid carbide end mill, Long end mill bits, 4flute end mill cutter, tungsten carbide end mill, square end mill Specification: Grade:BT55,BT60 Co%:12 or 9 Grain Size:0.2 or 0.4 Density (g/cm):14.35 or 14.1 Hardness(HRA):94.1 or 92.6 TRS N/mm2:5000 or 4600 ......
Xiamen Betalent Carbide Co.,Ltd
|
CNC Machining HRC45 T Slot End Mill Cutter Multi - Edged For Dry Cutting
|
... Size:0.7um Co:10 % Flexural strength: 3320N/mm2 Grain Size:0.6um Co:10 % Flexural strength: 4000N/mm2 Grain Size:0.5um Co:12 % Flexural strength: 4300N/mm2 Grain Size:0.5um Co:10 % Flexural strength: 4300N/mm2 T-Slot End Mill Cutter are usually 3-edged or...
ShenZhen Joeben Diamond Cutting Tools Co,.Ltd
|
Submit your “5000 n mm2 carbide milling cutters” inquiry in a minute :