IEC 60068-2-75 Striking Element for 20 J Impact Hammer with 5Kg Mass and X6Cr17 Material
|
IEC 60068-2-75:2014+AMD1 :2025 striking element for 20 J IEC 60068-2-75:2014+AMD1:2025 Striking Element for 20 J Specification Detail Place of Origin Guangdong, China (mainland) Equivalent mass 5kg Material X6Cr17 (1.4016, AISI 430) Rockwell hardness 69 ≤ ......
KingPo Technology Development Limited
|
IK10 impact hammer, pendulum impact test device,impact tester
|
...impact hammer, pendulum impact test device,impact tester To verify IK10 resistance, one impact of 5kg mass dropped from 400mm above the affected surface is necessary. “The Standard EN 62262 provides a maximum resistance of IK10 = 20 joules with the possibility of extending the test to 50 joules. Please verify our other Strikes Elements with different mass and launching tubes.” Ik Code No. Energy J IK01 0.14J IK02 0.20J IK03 0.35J IK04 0.50J...
ALLIED TESTING (HK) CO.,LTD.
|
2J to 50J Pendulum Hammer Mechanical Impact Test Apparatus IEC62262
|
...50J Pendulum Hammer Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of IEC60068-2-75 and IEC62262. The equipment consists of striking elements, swing pipes and test rig. The striking elements is made of steel, and there is a hole in the middle of the striking element for fixing with the swing pipe, the equivalent mass......
Pego Electronics (Yi Chun) Company Limited
|
300mm Height Impact Testing Machine Vertical Impact Hammer Test Equipment SH-9
|
...Hammer Test Apparatus SH-9 Parameters: Model SH-9 SH-9A SH-9B Release mode Electromagnet release Electromagnet release Electromagnet release Drop floor Nylon base 600mm*600mm; thickness 8mm; hardness HRR85-100. Nylon base 1000mm*1000mm; thickness 8mm; hardness HRR85-100. Hard wood board 114x114x42 mm Drop height 300mm 0-1000mm adjustable 457 mm Impact hammer 5J 2J, 5J, 10J, 20J, 50J Φ50.8mm Cylinder head, weight 4.5kg......
shanghai kerang technology co ltd
|
50J Impact Testing Apparatus , CNAS IK Striking Elements
|
IK striking elements impact test equipment drop test apparatus Parameters Model SC-IK01 Pendulum Length: 1000mm; external diameter: 9mm; steel pipe wall thickness: 0.5mm. Composition of the equivalent mass with impact element Impact point Up and down ......
Guangzhou Shice Equipment Co., Ltd.
|
IEC60068-2-75 Annex A Impact Testing Machine IK Level Test IK07 To IK10 And 50J
|
...the six energy values defined in Table 1 . For the purpose of these figures, the lengths of the striking element are calculated for vertical hammers or for pendulum hammers with arms of negligible mass. When the mass of the arms cannot be neglected, the...
Guangzhou HongCe Equipment Co., Ltd.
|
Safety Helmet Impact Penetration Resistance Testing Equipment Test The Impact Resistance And Penetration Resistance
|
... head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer with a mass of 5kg to impact from a height of 1m, and measure the force value at the moment of impact by the high-sensitivity force sensor device, so as...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “50j impact hammer with 5kg mass” inquiry in a minute :