67700 43 0 Liquid Polyurethane Resin With Compatibility In NC Resin
|
...free gravure printing inks. Specification Item Unit DR-7264 Appearance Pale yellow transparent liquid Solid content % 30±2 Viscosity mPaS/25℃ 800±200 Solvent ethyl acetate/isopropanol Features - Greatly cost-effective. - Good alcohol solubility, can be...
ANHUI DERUN IMPORT & EXPORT TRADING CO., LTD
|
Liquid Polyurethane Rubber For Making Concrete Formliners Tensile Strength 6.0-6.5 Mpa
|
Product Description Description of Polyurethane Molding Rubber Polyurethane mold rubbers consist of a Part A and a Part B that, after mixing, cure at room temperature to flexible, high-strength rubbers. Polyurethane rubbers make durable, easy releasing ......
MINGCHENG GROUP LIMITED
|
Nameplate Liquid Two Component Polyurethane Sealant
|
... High transparency Non-yellowing 3. Application Speical for nameplate 4. Physical properties Item Part B Part B Part B Appearance transparent liquid transparent liquid transparent liquid Viscosity(30℃)/mPa.s 300±150 300±150 300±150 Item Part A Part...
Qingdao Exceed Fine Chemicals Co.,Ltd
|
High Elongation Polyurethane Water Based PU Resin For Nylon Pulp
|
...Polyurethane Water Based PU Resin For Nylon Pulp WL-PU61 Water based polyurethane dispersion Product Introduction WL-PU61 is an anionic aliphatic water-based polyurethane dispersion, widely used in nylon pulp, denim pulp, thick board pulp and other textile printing coatings, waterproof products, inks and other industries. Physical Property: Appearance Milky white liquid Solid content 60±2 pH 7.0-9.0 Viscosity(mPa......
Xiamen WangQin Chemical Technology Co., Ltd.
|
Liquid Coating Waterproof Coating Building Roof PU Polymer Waterproof Coating Liquid Rubber Waterproofing Sealer
|
Liquid Coating Waterproof Coating Building Roof PU Polymer Waterproof Coating Liquid Rubber Waterproofing Sealer ∎Product Description PU-110 is One component polyurethane with excellent elastic waterproof material. ∎Technical Data Table PROPERTY STANDARD/UNITS VALUE Color/state Visual inspection Black,White,Blue,Grey Uniform Sticky Liquid Density (g/cm³) 1.35±0.1 Tack Free Time Hr 8 Tensile Strength Mpa......
Shanghai Max Tech Co.,Ltd
|
Flexible Foam Sponge Polyurethane Polymer Polyol with 45% Solid Content
|
...polyurethane,high-resilience block flexible foam,molding flexible foam,integral skin flexible foam and semi-flexible foam etc. Specification Test project Unit Indication range Appearance Milky white viscous liquid Solid content % 44-47.5 OH Value mgKOH/g 28-32 Misture % ≤0.08 Viscosity mPa......
Vida New Material Technology Co., Ltd.
|
Electrolube PUC Polyurethane Coating For Electronic Circuit Protection
|
... 38°C (Bulk), -4°C (Aerosol) Solids Content 37% (Bulk), 34% (Aerosol) Viscosity @ 20°C 150-240 mPa s Touch Dry Time 40-45 minutes Recommended Drying Time 24 hours @ 20°C, 180 minutes @ 65°C, ......
Shenzhen Huazhisheng New Material Technology Co., Ltd.
|
10 Inch Gate Valve , EPDM LUG Stainless Steel Knife Valve ANSI 150 LBS
|
...PN(MPa): 0.6~1.6 (class150) Testing Pressure Shell PN(MPa): 1.5~2.4 Testing Pressure Sealing PN(MPa): 1.1~1.76 Seal type hard / soft (EPDM,NBR and polyurethane) Leakage: hard seal: Level D(liquid 0.1xDNmm);soft seal: Level A (zero leakage) 2.Material could be: Part Material......
TOBO STEEL GROUP CHINA
|
Submit your “6 0 6 5 mpa liquid polyurethane” inquiry in a minute :