IEC 62368-1 2018 Clause 5.3.2, V.1.5 Figure V.4 Wedge Probe
|
...62368-1:2018 Clause 5.3.2, V.1.5 and Figure V.4 Wedge Probe Product Information: The wedge probe conforms to the standard requirement of IEC 62368-1:2018 clause 5.3.2, 8.5.4.3, V.1.5 and figure V.4, IEC 60950-1 Fig NAF.2(S5366)and NAF.3(S5370), BS 60950.1108/260/CD and etc. It is used to test whether the slot openings can be touched by people. The test......
Sinuo Testing Equipment Co. , Limited
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
800N Test Device As Per IEC 60601-1 Clause.9.4.2.3b / IEC 62368-1:2018 Clause 8.6.2.3
|
800N Test Device as per IEC 60601-1 clause.9.4.2.3b / IEC 62368-1:2018 clause 8.6.2.3 Technical Parameters: Standards IEC 60601-1,IEC 62368-1 Clause IEC 60601-1-clause.9.4.2.3b . IEC 62368-1:2018 clause 8.6.2.3. Weight load 800N Height Maximum lifting ......
KingPo Technology Development Limited
|
IEC 62368 Test Probe Kits
|
Product Description Consists of Five test probe: 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) Diameter 1 mm, Length 20 mm Terminal Probe 1) Straight Unjointed Test Probes......
HK LEE HING INDUSTRY CO., LIMITED
|
Stainless Steel IEC 62368 Figure V.5 Terminal Probe
|
...Test Probes IEC62368 probe no. Probe Name IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children IEC62368 Figure V.2 Jointed test probe for equipment like to be accessible to children IEC62368 Figure V.3 Blunt probe, Telecom Test Probe IEC62368 Figure V.4 Wedge probe IEC62368 Figure V.5 Terminal probe I) IEC 62368 Figure V.1 Jointed test probe......
Guangzhou Shice Equipment Co., Ltd.
|
Impulse Test Generator Test Equipment EVSE Testing Equipment Circuit 1 7KV
|
Impulse Test Generator Test Equipment EVSE Testing Equipment Circuit 1 7KV Complied Standards & Clauses Conform to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, Annex G.10, circuit 1 of Table D.1, etc. and etc.Conform to IEC 62368-1:2018 clause 5.4......
Sinuo Testing Equipment Co. , Limited
|
Boost Battery Performance with Charge / Discharge Battery Testing System for Maximum Efficiency
|
...test device is designed to verify the compatibility of protective grounding conductors and overcurrent protection devices (rated ≤25A) with fault currents up to 1500A, and to assess the integrity of supplementary safety protections. It complies with Clause 5.6.4.1, 5.6.5.1, and Appendix R of IEC 62368-1:2018, EN 62368......
Hai Da Labtester
|
IEC 60529 Jointed Test Finger Probe Stainless Steel With 50N Force
|
Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC 62368......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
80mm Blunt Probe As Per IEC 60950 IEC 60065 IEC 62368-1 For Testing TNT Circuit
|
Blunt Probe as Per IEC60950, IEC60065 and IEC62368-1 for Testing TNT Circuit 1. Introduction The blunt probe is designed according to IEC60950 figure 2C, IEC60065 figure B1, IEC62151 figure 3, UL6500 figure B.1, IEC62368-1 figure V.3. It is applied to ......
Pego Electronics (Yi Chun) Company Limited
|
Submit your “62368 1 2018 test probe” inquiry in a minute :