Integrated Electrical Appliance Door Endurance Testing Equipment IEC 60335
|
... for spin extractors” clause 18 IEC60335-2-11:2008 “Household and similar electrical appliances-Safety-Part2-11: Particular requirements for tumble dryers” clause 20.101 IEC60335-2-7:2016 “Household and similar electrical appliances-Safety-Part2-7:...
Sinuo Testing Equipment Co. , Limited
|
IEC60320-1 Appliance Couplers Endurance Test Equipment for Testing Break Capacity and Normal Operation
|
... of IEC60320-1:2015 clause 19 break capacity and clause 20 normal operation, for testing connector and appliance outlet. The number of working station can be customized as per user’s requirement (that is depends on how many specimens that will be...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-2-25: 2014 Microwave Oven Door Endurance Test Equipment
|
...dedicated tester which is used to inspect the wear resistance of the microwave door system, including the structure of the hinge, microwave seals and other related components that during the process of using. The device uses advanced PLC control system and...
Guangzhou HongCe Equipment Co., Ltd.
|
Home Appliances Cordless Kettle Endurance Test Equipment Voltage Output 0-250V
|
...Safety – Part 2-15: Particular requirements for appliances for heating liquids’ clause 22.103. Application of Home Appliances Test Equipment: The appliance coupler of cordless appliances shall be constructed to withstand the stresses occurring during...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Door Endurance Testing Machine For Washing Machine HJ0636 PLC Control
|
... 60335-2-11 household and similar electrical appliances – safety: part 2-11:particular requirements for tumble dryers, clause 20.101. Application: The device is used for mechanical endurance test to doors of washing machine and tumble dryer. Test sample:...
shanghai kerang technology co ltd
|
UL923 Microwave Cooking Appliances -Door Assembly Tests
|
...Appliances -Door Assembly Tests 40 Door Assembly Tests 40.1 Door operation 40.1 .1 The door assembly shall withstand the forces expected during intended usage without affecting the seal to the extent that the equivalent plane wave power density of microwave radiation emitted exceeds 5 mW/cm 2 at any point 5 cm or more from the external surface of the enclosure when subjected to the test in Microwave Radiation Emission Test...
KingPo Technology Development Limited
|
Electric Vehicle Plug Mechanical Lock Endurance Test Equipment IEC62196-1
|
...-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. Equipment Overview The servo motor drive mechanism is used to perform linear plug-and-pull repetitive actions on the sample, and an external load can be ......
Sinuo Testing Equipment Co. , Limited
|
IEC60884-1 Figure 16 Switch Plug Socket Endurance Test Equipment
|
..., IEC60669-1 and etc. It is applicable for the switches breaking capacity and normal operation life test of household and similar fixed electrical installations, also suitable for plugs and sockets’ breaking capacity and normal operation life testing of...
Dongguan Kingpo Technology Limited
|
EN 344 Shoe Sole Bending Test Machine Shoe Sole Flexing Endurance Testing Equipment
|
... bending. It is particularly suitable for the construction of shoe soles. During the test, at the maximum bending stress line of the anti-slip pattern on the shoe sole, a cutting knife is used to make three small cuts. After ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Automatic Stop To Set Test Cycle Door Fatigue Testing Equipment
|
... stop to set test cycle. DESIGN STANDARD: ISO 7170-2005 STANDARD FEATURES Item Description Test speed 5-20 times /min 5-20 times /min Display Touch screen display Control system PLC control Test stroke 800mm Test times 1-999999 times (can be...
Dongguan Haida Equipment Co.,LTD
|