DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
...RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black......
SHENZHEN ZD TECH CO., LTD
|
Alum Outside -120dBc N Female RF Dummy Load
|
...RF Dummy Load N Female 3.8GHz 4GHz RF Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy...
HeFei Vinncom Science And Technology Co.,LTD
|
Alum Outside -120dBc N Female RF Dummy Load
|
|
50 Watts RF Dummy Load N Female 3.8GHz 4GHz RF Termination Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-50W-ONf Operating ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
50W 600-4000MHz RF Termination Load RF Dummy Load in Black Anodized Aluminum for Ibs
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Input Power(W) 5 10 30 50 RF ......
Anhui Bonfire Technology Co., Ltd
|
F Male Terminator, RF Dummy Load
|
F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ......
Changzhou H .N . Electronic Co., Ltd.,
|
40GHz 2.92mm RF Load Termination Black 10 Watt Dummy Load
|
10Watt 2.92mm coaxial Termination Zysen's 10W Wideband (DC-40 GHz) Millimeter Wave terminations available with 50 impedance & 2.92mm Female/Male connectors. With Great VSWR 1.15 Typ. High integrity. Electrical Specifications Frequency Range DC – 40GHz ......
Chengdu Zysen Technology Co., Ltd.
|
Aluminum Material Silver Plated Waveguide Parts Matched Rf Dummy Load
|
Waveguide Aluminum Material Silver-plated Matched Load Components Quick Details Place of Origin:Sichuan, China Brand Name:sinoscite, Microwave Material:Aluminum material, silver-plating Applications:Microwave test Characteristic:Compact, full bandwidth, ......
Chengdu SinoScite Technology Co., Ltd.
|
220 V Phase Voltage Capacitive Load Bank , Fan Power Generator Dummy Load
|
... for power supplies from 1kW to 60MW. Resistive, inductive(reactive),capacitive or combined load banks can be customised for any application. Load banks can be supplied for most powers, voltages, frequencies and sizes. Multi-voltage load banks are also...
Hebei Kaixiang Electrical Technology Co., Ltd
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
200w 50 Ohm RF Resistor High Frequency Resistance Dummy Load Resistor
|
...RF Resistor High Frequency Resistance Dummy Load Resistor product name: Electronic component passive component RF resistor 50 ohm 100 ohm 1000W flange installation terminal resistor ceramic power resistor product description: Description: RIG high power resistance is also called RIG RF resistor, RF RF resistor, high frequency RF resistor, flange RF resistor, load RF resistor, RF......
Sichuan Qixing Electronics Co., Ltd.
|
Submit your “black anodizeing rf dummy load” inquiry in a minute :