Home > Tools & Hardware > Hand Tools > Other Hand Tools >

Clause 23 2 Force And Torque Tester

1-10 Results for

clause 23 2 force and torque tester

from 3 Products

IEC 62196-1 Clause 25.3 Cord Anchorage Pull Force And Torque Tester For EV Plugs And Vehicle Connectors

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control

...the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC60884-1 2.5N Manual Plug Socket Torque Tester

... Introduction: Compliance with Standard: The device adheres to IEC 60884 - 1 'Plugs and socket - outlets for household and similar purposes – Part 1: General requirements' clause 14.23.2. It details the specific test setup where the torque test device is...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Submit your “clause 23 2 force and torque tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Guangzhou HongCe Equipment Co., Ltd. Products: IEC60884-1 2.5N Manual Plug Socket Torque Tester
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “clause 23 2 force and torque tester” inquiry

*From:
Your email address is incorrect!
To: Pego Electronics (Yi Chun) Company Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories