Clause 25.15 Electrical Test Instruments Power Cord Anchorage Pull Force Torque Tester
|
...-1 clause 25.15, GB7000, GB2486 and etc., It is used to test tension and torque on the terminals of appliances provided with a supply cord and household appliances intended to be permanently connected to fixed wiring with flexible cords, it shall not be...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Test Apparatus
|
...the standard requirements of IEC60335-1 clause 25.15, IEC60065:2014 clause 16.5, IEC60884-1, IEC60598-1, etc. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing....
Sinuo Testing Equipment Co. , Limited
|
8mm Plug Torque Test Apparatus To Testing The Strain Force Of Insertion
|
...clause 15.4.1Plug torque test apparatus HC9908 Standard: Conforms to IEC60065:2014 clause 15.4.1 and figure 11, IEC 60884-1 2013 clause 14.23.2, IEC 60335-1 clause 22.3, IEC60065 clause 15.4.1 and figure 11 Application: This device is use to test the strain force of insertion. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. Test......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC62196-1 Electric Vehicle Plugs And Connectors Cable Pull And Torque Test Apparatus
|
... clause 23.3, etc. Equipment Overview This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. Pull is realized by single-phase speed-regulating motor to...
Sinuo Testing Equipment Co. , Limited
|
Cable / Cord Anchorage Torque Tester IEC 60335-1 Clause 25.15 / IEC60950-1-class3.2.6
|
... standards. It is use to perform tension and torque test on the power cord. It is used to test the strength of connections. Accordding to the standard IEC 60335-1 Clause 25.15 --“Appliances provided with a supply cord, and appliances intended to be...
KingPo Technology Development Limited
|
IEC 60335 Power Cord Twice Tension And Torque Test Apparatus Can Be 120N
|
...25.15, IEC60065: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
IEC60065 Figure 11 Socket Outlet Torque Test Apparatus
|
IEC60065 Figure 11 Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced int......
Dongguan Kingpo Technology Limited
|
Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug
|
... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots......
HK LEE HING INDUSTRY CO., LIMITED
|
60rpm Household Appliance Test Equipment 3 Stations Flexing Test Apparatus For Supply Cord
|
...Test Equipment 3 Stations Flexing Test Apparatus For Supply Cord Standard of Flexing Test Apparatus: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 23.3, clause 25.14 and figure 8 Application of Flexing Test Apparatus: IEC 60335-1 (Household appliance) section 25......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC62262 Impact Testing Apparatus , 20J Pendulum Hammer Impact Test
|
...Test Apparatus IEC62262 IEC60068 Test Ehc Parameters: Standard IEC60068-2-75 Environmental testing –Part 2: Tests – Test Eh: Hammer tests clause 5 Test Eha: Pendulum hammer, IEC62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) Pendulum rod angle 0-90 ° adjustable, scale display Pendulum rod length 1000mm. φ9 is used for 1J and 2J , φ15......
Guangzhou Shice Equipment Co., Ltd.
|
