IEC 62196-1 Electric Vehicle Terminal Test Equipment For Mechanical Tests On Terminals
|
...-1:2020 clause 13.3.1 fig12, table 3, etc. It is used to process mechanical tests on terminals, for judging whether the design and the structure of the new terminals are fitted with new conductors and of the minimum and the maximum cross-sectional areas is...
Sinuo Testing Equipment Co. , Limited
|
IEC 61851 Electric Vehicle EVSE Test Equipment Mechanical Strength Impact Tester
|
IEC 61851 Electric Vehicle Supply Equipment EVSE Mechanical Strength Impact Test Equipment Complied Standards & Clauses This mechanical strength inpact test equipment complied to IEC 61851-1 2017 clause 12.11 standards. Technical Parameters Control and ......
Sinuo Testing Equipment Co. , Limited
|
EV Connectors Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator
|
...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to...
Pego Electronics (Yi Chun) Company Limited
|
Electric Iron Drop Test Equipment
|
Electric Iron Drop Test Equipment Standard: Clause 21.101 of IEC 60335-2-3 Household and similar electrical appliances – Safety: Part 2-3: Particular requirements for electric ions, Clause 21.101 of IEC 60335-2-17 Household and similar electrical ......
shanghai kerang technology co ltd
|
ISO 16750-4 Auto Parts Test Equipment Splash Water And Submersion Test Chamber
|
...Test Equipment Splash Water And Submersion Test Chamber Standard: ISO16750-4 Road vehicles-Environmental conditions and testing for electrical and electronic equipment-Part 4: Climatic loads, clause 5.4.2 Ice water shock test. VW-80000 Electric And Electronic Components In Motor Vehicles up to 3.5t General Requirements, Test Conditions and Tests clause......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Splash Water Ingress Protection Test Equipment For Road Vehicles
|
... Test System Splash 3s Under 0-4°C To Simulated Environments A. SYSTEM introduction : It conforms to ISO16750.4clause 5.4 :Ice water shock test ,It is Used For Safety Testing For Simulated Environments Of Electrical And Electronic Systems that may be...
Dongguan Kingpo Technology Limited
|
Electric Control Ingress Protection Test Equipment Road Vehicles Water Splash Test System Under 0 - 4°C
|
ISO16750.4 Clause 5.4 Road Vehicles Water Splash Test System Splash 3s Under 0-4°C To Simulated Environments A. SYSTEM introduction : It conforms to ISO16750.4clause 5.4 :Ice water shock test ,It is Used For Safety Testing For Simulated Environments Of ......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC62196-1 Electric Vehicle Test Equipment For Charging Plug And Socket Cable Flexing
|
...;Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c" clause 7.11 and clause 7.15 IEC 60309-1:2012 "Plug,socket-outlets and couplers for...
KingPo Technology Development Limited
|
Mckee EV Portable Electric Vehicle Charger 3 Phase Type 2 Car Charging Connector
|
Mckee EV Portable Electric Vehicle Charger 3 Phase Type 2 Car Charging Connector Description MCKEE series charging module is the internal DC power module of out-door integrated DC charging piles, which converts AC to DC and then charge electric vehicles, ......
Luoyang Mckee Intelligent Technology Co.,LTD
|
SHV male connector for RG58 Cable
|
SHV male connector for RG58 Cable Series SHV is coaxial high voltage connector with 3.5KV (RMS) or 5KV DC. The connector is widely used in nuclear devices and test equipment . Voltage is suitable for matching mated or unmatched conditions. Product Details ......
Terui International Group Co.,Ltd.
|