DC12.4GHz Coaxial Fixed Terminations Dummy Load 50W VSWR 1.3 45×125.5mm
|
Coaxial Fixed Terminations Series 50Ω 50w Connector N DC-12.4 Max VSWR1.3 45×125.5mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as circulators and directional couplers to make these ports which are not involved in the measurement be terminated......
Shenzhen Yulongtong Electron Co., Ltd.
|
Grey/Red/Black/Customized 350-6000MHz DIN Male 100W Coaxial RF Termination Dummy Load
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
0.5watt RF Coaxial Connector SMP Dummy Load Terminator 40GHz 50Ohm
|
... Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed......
Xi'an Elite Electronic Industry Co., Ltd.
|
N male Connector Termination dummy load N-50JR-18A
|
...Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Terui International Group Co.,Ltd.
|
Circulator Directional Coupler RF Dummy Load For Antenna And Transmitter 30w
|
...transmitter. They are also used as match ports in many multiport microwave device such as circulator and directional coupler to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an...
SHENZHEN ZD TECH CO., LTD
|
30 Watts 3.8G DIN Male RF Dummy Load Termination
|
...Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
DC-6GHz 100W 4.3-10 Female Dummy Load / Termination Load
|
... the frequency is wide.And our company also has RF Dummy Load for other types of connectors. RF Dummy Load provides a stable and reliable load for testing and troubleshooting radio frequency equipment. RF Dummy Load can simulate a varying input signal and...
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.......
Chengdu Zysen Technology Co., Ltd.
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
N Type Male Coaxial RF Termination Load – 1W Power Rating
|
... as an energy-absorbing component in high-frequency systems. Widely used for precision testing and measurement of microwave devices, RF systems, and indoor distributed terminals....
Xi'an Sipu RF Technology Co., Ltd.
|
Submit your “coaxial fixed terminations dummy load” inquiry in a minute :