SIT Combustible Materials Edge Ignition ISO11925 Small Flame Tester
|
...Tester Introduction: SIT ISO11925 Small Flame Tester is designed and manufactured in accordance with DIN 53438 & ISO 11925-2 standard. SIT ISO11925 Small Flame Tester uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material......
Delta Technology (Chongqing) Co., Ltd.
|
DIN EN ISO 9239 Floor Material Combustion Performance Tester Floor Materials Burning Property Tester
|
... the combustion performance of floor materials. In the test combustion chamber, a small flame is ignited to ignite the floor materials placed horizontally and exposed to a 30° inclined heat radiation plate, to assess their flame propagation ability. It is...
DONGGUAN LONROY EQUIPMENT CO LTD
|
EN 50281-2-1 Flammability Testing Equipment / Combustible Dust Minimum Ignition Temperature Tester
|
... heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud. Standard: EN 50281-2-1:...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
EN ISO 11925-2 45 Degree Automatic Building Materials Ignitability Tester
|
...impingement of vertical single-flame source in the principle of German Klein Brenner, For related categories B, C, D, e, Bfl, Cfl, Dfl and Efl in all combustible materials testing, the device provide overall solution, and is applicable to the operator, the...
SKYLINE INSTRUMENTS CO.,LTD
|
IEC60950-1 Hot Wire Ignition Tester Annealing Time 8s-12s Power 0.26W/Mm±4%
|
...Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, and of uniform thickness stated by the material manufacturer. Edges......
Guangzhou HongCe Equipment Co., Ltd.
|
BS 476-12 Ignitability Tester by Direct Flame Impingement Test Method
|
...Ignitability Tester is designed according to the BS476-12:1991. Method of test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability......
Advanced Instruments Co.,Limited
|
Glow wire ignition tester,safety test equipment, glow wire testing machine
|
...ignition tester,safety test equipment Model FGW: Glow wire ignition tester,safety test equipment Glow wire ignition tester,safety test equipment is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material......
ALLIED TESTING (HK) CO.,LTD.
|
High Current Arc Ignition Tester Arc Ignition Speed 40 Times/Minute Flammability Testing Equipment
|
...Ignition Tester Arc Ignition Speed 40 Times/Minute Flammability Testing Equipment Product Introduction HAI-1 High Current Arc Ignition Tester is a professional Flammability Testing Equipment created by the original manufacturer. It strictly follows international standards and provides enterprises with reliable material......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Ring Crush And Edge Compressive Tester ISTA Packaging Testing Machine
|
...Edge Compressive Tester ISTA Packaging Testing Machine Ring Crush and Edge Compressive Tester.pdf Product Description: Ring Crush and Edge Compressive Tester can do a full range of testing, which includes Ring Crush Testing, Flat Crush testing, Edge Compressive Testing, Adhensive Strength Testing and other general compression tests, to a variety of materials like paper, packaging materials......
Hai Da Labtester
|
ARC Heavy Current Ignition Tester For Household Appliances Materials
|
...: It is suitable for arcing resistance test of electric and electronic products, household appliances and its materials. The working principle is to simulate the electric leakage on the insulator which may cause among different polar of live parts or...
Dongguan Kingpo Technology Limited
|
Submit your “combustible materials edge ignition tester” inquiry in a minute :