Clause 8 Test Probe C For Electric Vehicle Conductive Charging System Test IEC 61851-1
|
...tem-Part 1: General requirements IEC 60529 Edition 2.1 2001-02, IEC61032 test probe C and IEC60529 for IP3, IEC60065 and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the...
Sinuo Testing Equipment Co. , Limited
|
DC 11GHz High Current Test Probes 6 Pins POGO Pin Connector ODM
|
...Charging Test Conductive High Current Battery Probe, Mold Antenna Thimble POGO PIN The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe......
Charter Leader Precision Electronic Co.,Ltd
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
EN IEC 61851-1 EVSE Testing Equipment Electric Vehicle Conductive Charging Pile Static Load Test Bench
|
...Conductive Charging Pile Static Load Test Bench Complied Standards & Clauses for Electric Vehicle Conductive Charging Pile Static Load Test Bench This Electric Vehicle Conductive Charging Pile Static Load Test Bench complied to EN IEC 61851-1-2019, IEC 61851-1-2017 and etc. Technical Parameters for Electric Vehicle Conductive Charging Pile Static Load Test......
Sinuo Testing Equipment Co. , Limited
|
Eddy Current Testing Probes Electrical Conductivity Meter 60khz For Non Ferrous Metals
|
...Testing Probes Electrical Conductivity Meter Non-Ferrous Metals HEC-102 eddy current electrical conductivity meter, measurement technology of eddy current, which are designed for quick & convenient measurement of material property, such as material separate,quality control,material state check and so on. The products use the electromagnetism testing principle, can testing......
HUATEC GROUP CORPORATION
|
Spring Loaded Pogo Pins High Precision Test Probe Pogo Pin For Wearable Device Charging
|
... in electronic devices. Its structure is designed to ensure reliable conductivity, durability, and mechanical resilience. Below is a detailed breakdown of its components. Plunger (Needle/Pin): The movable contact tip that compresses when pressed against a...
SHENZHEN JRKCONN ELECTRONICS CO.,LTD
|
Eddy Conductivity Meter Non Destructive Testing Probe With 14mm 60KHz & 8mm 500KHz
|
Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ......
TMTeck Instrument Co., Ltd
|
Industrial OEM Electrical Conductivity Sensor RS485 Water Testing Probe
|
Industrial Online Water Testing Digital RS485 Conductivity Sensor Conductivity Probe Digital Output Sensor Product Description Description Digital conductivity sensor adopts a new generation of four-electrode/six-electrode technology, with wide measurement......
Xi'an Desun Uniwill Electronic Technology Co., Ltd.
|
UL60950-1 Test Probe Kits, test probe
|
...test probe: 1) Figure 2A – Test finger 2) Figure 2B – Test pin 3) Figure 2C – Test probe 4) Figure 2D – Accessibility of internal conductive parts 5) Figure EE.1 & EE.2 – Wedge probe 6) Figure EE.3 – Articulated accessibility probe Company introduction HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test and measuring equipment for products testing......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC60598-2-20 Clause 20.11.2 Flat Test Probe For Testing String Lights
|
...Probe HT-I29 Standard:IEC60598-2-20 clause 20.11.2. Application:It is used for testing the string lights which can not make all of the metal intertexture or other metal decorating parts charged. Test sample:String lights. Feature:It shall not be possible to touch live parts with this probe when the probe is applied in any position of the lamp which is installed with the chain with a force not exceeding 0.5 N. Parameters: Model HT-I29 Probe...
shanghai kerang technology co ltd
|
Submit your “conductive charging system test probe” inquiry in a minute :