Home > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Instrumentation Cables >

Cord Anchorage Force And Torque Tester

1-10 Results for

cord anchorage force and torque tester

from 7 Products

IEC60884-1 Clause 23.2 Cord Anchorage Force And Torque Test Equipment

... 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. Prodcut Information: The tester is used to conduct two tests of tension and torque at the terminals of...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC 62196-1 Clause 25.3 Cord Anchorage Pull Force And Torque Tester For EV Plugs And Vehicle Connectors

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

20mm Torque Arm Cord Anchorage Strain And Twist Tester Machine

Cord Anchorage For Supply Cord Household Appliance Test Equipment Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 25.15 Application: It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Appliances provided with a supply cord......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

AC 230V Electrical Appliance Tester , IEC60335 - 1 Cord Anchorage Torque And Twist Tester

...Cord Anchorage Torque And Twist Tester Electrical Appliance Tester Product information: The test appliance conforms to IEC60335-1:25.15. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Parameters: Power Supply AC230V, 50HZ Pull force weights 20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved) Torque......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage

IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus: This pull force and torque test equipment is used to ......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Cable Anchorage Pull Force and Torque Test Apparatus for Charging Station

... and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at the terminals from pulling force and torque. This...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

115V 60Hz Power Outlet Tester Cord Retention Testing CR-1 60 Times/Min

Apparatus for testing cord retention CR-1 Product details: This device conforms to the standard requirement of IEC60884 figure 20. It is for testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage. The cord......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Submit your “cord anchorage force and torque tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	shanghai kerang technology co ltd Products: 115V 60Hz Power Outlet Tester Cord Retention Testing CR-1 60 Times/Min
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “cord anchorage force and torque tester” inquiry

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories