200 Watts 4.3-10 Male DC-4G Altronic Dummy Load
|
0-4GHz 200W 4.3-10 Male Dummy Load Better heating shrink Wide band Good VSWR VN-LD-4G-200W-IPm-S.pdf Part Number VN-LD-4G-200W-IPm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×43dBm) -120 Application ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
200 Watts 4.3-10 Male DC-4G Altronic Dummy Load
|
200 Watts 4.3-10 Male 3.8GHz 4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the ......
HeFei Vinncom Science And Technology Co.,LTD
|
DC-4000MHz 10W Dummy Load RF Terminations Loads for 4.3-10-M Interface Compact Design
|
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤......
Anhui Bonfire Technology Co., Ltd
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male RoHS Aluminium black oxide dc...
SHENZHEN ZD TECH CO., LTD
|
50kW 650V-1000V DC Dummy Load Bank Portable Variable Resistive Load Bank Cabinet
|
50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ......
Shenzhen Zenithsun Electronics Tech.CO.,LTD
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
48V 200A battery test dummy load bank
|
Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ......
Hebei Kaixiang Electrical Technology Co., Ltd
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
...Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronic Industry Co., Ltd.
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.......
Chengdu Zysen Technology Co., Ltd.
|
100 Watt Dummy Load Coaxial Cable Connectors 1-4 Generation With Gold Flash
|
...dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC......
Dalee Electronic Co., Ltd.
|
