DC 4GHz Fixed Rf Attenuator 30 Watts 40dB Aluminum Housing
|
DC-4GHz 30Watts Fixed Attenuator Zysen's 30W attenuators available with DC-4GHz, DC-8GHz, DC-12.4GHz, DC-18GHz, 50 impedance & SMA, N Female/Male connectors. Available with 1, 3, 6, 9, 10, 20, 30dB, 40dB, 50dB, 60dB attenutation. Electrical Specifications Frequency Range DC – 4GHz Power 30W CW @ 25ºC Attenuation 1~10dB 11~20dB 21~30dB 31~40dB Attenuation......
Chengdu Zysen Technology Co., Ltd.
|
100w N Male To N Female 50 Ohm DC-3.8G RF Attenuator
|
DC-3.8GHz 100 Watts N Male-N Female 3~30dB RF Coaxial Attenuators RF attenuators usually can be used to reduce the power of the signal within many RF circuit designs and RF systems. These RF attenuators can be fixed, switched,surface mounted or even continuously variable. Vinncom has many types of RF attenuators with different frequency range. Vinncom also can supply attenuators with good PIM value(-160 dbc@43dbm*2) in some RF......
HeFei Vinncom Science And Technology Co.,LTD
|
RoHS Outdoor 30dB Fixed RF Attenuator DC-40GHz 20W 2.92mm
|
DC-40GHz 20W 2.92mm Male-2.92mm Female 3 10 20 30 40dB Attenuator Wide working frequency range Low standing wave High attenuation accuracy Part Number VN-AT-40G-20W-2.92mm Operating Frequency DC-40 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
200 W Coaxial Fixed Attenuators Fixed RF Attenuator DC-18 GHz Connector N TNC
|
...Fixed Attenuators DC-18 GHz Connector N,TNC Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the power range, control the power level, and can be configured with a small power meter, comprehensive tester or spectrum analyzer to accurately measure the power or spectrum of various RF......
Nanjing Shinewave Technology Co., Ltd.
|
200W N-Jk Fixed RF Attenuators 6 10 15 20 30 40dB 50dB DC-3800MHz 50ohm Variable Attenuator
|
...: Frequency Range(MHz) DC-3800 VSWR ≤ 1.25 Attenuation(dB) 3 5 6 10 15 20 30 Accuracy(dB) ±0.6 ±0.6 ±0.6 ±0.8 ±0.9 ±1.1 ±1.6 Average Power(W) 50 Impedance(Ω) 50 RF Connector In: N-M/Out: N-F Color Black Relative humidity 5%~95% Operating...
Anhui Bonfire Technology Co., Ltd
|
DC - 3GHz Fixed Coaxial Attenuator , Waterproof 50 Ohm Rf Attenuator N Male N Female
|
... connectors. ☀ Our cables and cable connectors are built-in and shipped worldwide. ☀ The N connector (in full, Type N connector) is a threaded, weatherproof, medium- size RF connector used to join coaxial cables. It was one of...
SHENZHEN ZD TECH CO., LTD
|
VSWR 1.2 1.3 1.25 Coaxial Fixed 10w Attenuator DC 12.4GHz 6GHz 18GHz 21x71mm
|
... range and controlling power level, also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. Model Power Rating(W) Frequency(GHz) Max VSWR Attenuation (dB)...
Shenzhen Yulongtong Electron Co., Ltd.
|
2W DC-6GHz SMA Male to SMA Female Coaxial RF Attenuator 1/2/3/5/6/10/15/30db Attenuator SMA Fixed Connectors Gold Plate
|
...2W DC-6GHz SMA Male to SMA Female Coaxial RF Attenuator, 1/2/3/5/6/10/15/30db Attenuator, SMA Fixed Connectors Gold Plated Attenuator Temperature Range -55~+155°C (PE Cable -40~+85°C) Impedance 50Ω Vibration 100m/S2 (10~500Hz), 10g Frequency Range DC-......
Zhangjiagang RY Electronic CO.,LTD
|
RF Attenuator 1.85mm Male to Female attenuator 1W 67GHZ 3dB
|
RF Fixed Attenuators N RF Fixed Attenuator is used to reduce the signal level. The general reason for wanting to reduce the signal level may be to avoid receiving a signal with too high a level in a hierarchical circuit, or to meet the need to control the signal level in an application. n RF Fixed Attenuator usually consists of a resistor network that allows heat to escape at a certain rate. As a RF Fixed Attenuator......
Terui International Group Co.,Ltd.
|
Coaxial In-line SC 6db Variable RF Attenuator , Multimode Fiber Attenuator
|
...RF Attenuator , Multimode Fiber Attenuator Quick Detail: Name: SC Fiber optic attenuator Mode: Singlemode, Multimode Type: Fixed, Female & male, In-line, Variable Attenuation value: 1dB~30dB Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm PC, UPC, and APC polish types optional Description: Fiber Optic Attenuator......
SHENZHEN FURONG FIBER OPTIC CABLE CO.,LTD
|
