VN-LD-6G-100W-ONm-S DC-6GHz 100W Dummy Load / Termination Load ROHS Compliance
|
DC-6GHz 100W Dummy Load /Termination Load Good VSWR Wide band ROHS Compliance VN-LD-6G-100W-ONm-S.pdf Part Number VN-LD-6G-100W-ONm-S Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating Temperature ( ℃ ) -40......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
25w DC 6GHz Chip Terminations
|
... RFR50N-1CT24801B 3 DC-30 1.50 1.27 2.54 0.6 1.54 0.5 0.6 RFR50-3CT43702F 5 DC-6 1.25 1.27 2.54 0.6 1.54 0.4 0.6 RFR50N-5CT27001B 12 DC-6 1.20 1.5 3 0.38 N/A N/A N/A RFR50N-12CT15803B 5 DC-12 1.35 2.5 3 0.6 N/A N/A N/A RFR50-5CT0214B 25 DC-6 1.20 2.5 5 1...
Shenzhen Yulongtong Electron Co., Ltd.
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
...Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronic Industry Co., Ltd.
|
Copper N Male/Plug DC-4000MHz RF Termination Load Connector 5W Dummy Load at FZ-XXXXX
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤......
Anhui Bonfire Technology Co., Ltd
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA......
Chengdu Zysen Technology Co., Ltd.
|
DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm
|
DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm 1W RF Dummy Load (N, DC-6GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its characteristic impedance in order to ensure an accurate measurement. Terminations......
SHENZHEN ZD TECH CO., LTD
|
100W RF Load 4G MHZ
|
100W RF LOAD PIM 150dBc input 100W Description: Terminations, or loads, offered by Lenolink are matched to 50 ohms characteristic impedance. Matched loads provide a termination designed to absorb all the incident power with very little reflection, effectively terminating the line or port in its characteristic impedance. Terminations......
Lenolink Telecommunication Co.,Ltd
|
Female SMT Type IPX High Power RF Connectors RF Termination Load For WiFi Routers
|
... Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC~3GHz). 1.5 MAX.(3~6GHz) Contact plating : 1u’’/1.5u’’ Grounded plating:...
Dalee Electronic Co., Ltd.
|
6G DIN Male 0 - 4MHz Waveguide Termination Load
|
... the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works,...
HeFei Vinncom Science And Technology Co.,LTD
|
DC Brush Motor rated voltage 1.5v 60-100W no load speed 3350 rpm electric motor for juice extractor
|
DC Brush Motor rated voltage 1.5v 60-100W no load speed 3350 rpm electric motor for juice extractor DC motor is widely used in juicier, with output power up to 100W, weight up to 1.5KG and maximum voltage up to 1.5V. direct current motor is a motor that ......
Shenzhen Go-Gold Motor Co., Ltd.
|