IP20 Din Rail 80KA Surge Protection Device SPD Type 1+2
|
Din rail 80KA Surge Protection device Type 1+2 with lightning protection class 3+4 Technical Parameters Model: Maximum continuous voltage AC Uc V 275/320/385/440 SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 class I+II Lightning impulse current (10/350µs) Iimp kA 15-25 Nominal discharge current (8/20µs) In kA 40-80 Maximum discharge current (8/20µs) Imax kA 80-160 Voltage protection......
Guangdong Uchi Electronics Co.,Ltd
|
IP20 Din Rail 80KA Surge Protection Device SPD Type 1+2
|
|
Din rail 80KA Surge Protection device Type 1+2 with lightning protection class 3+4 Technical Parameters Model: Maximum continuous voltage AC Uc V 275/320/385/440 SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 class I+II Lightning impulse current (10/350µs) Iimp kA 15-25 Nominal discharge current (8/20µs) In kA 40-80 Maximum discharge current (8/20µs) Imax kA 80-160 Voltage protection......
Guangdong Uchi Technology Co.,Ltd
|
Type2 P1 SPD for POE Network Surge Protection Signal Surge Protective Devices
|
Type2 P1 SPD for POE Network Surge Protection, Signal Surge Protective Devices Type2 P1 SPD for POE Network Surge Protection Feature: • Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage. • Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against lightning induced surges. • Standard: IEC 61643-21 • Enhanced surge protection. • For mounting on 35mm DIN rails...
Britec Electric Co., Ltd.
|
Network Surge Protection Device Single Port 10/100/1000Mbps Din Rail
|
...Din Rail Network Surge Protection Device Technical Parameters Interface Form RJ45 Rated operating voltage Un 5V MAX Continuous running voltage Uc 8V Nominal discharge current In(8/20) 5KA Maximum discharge current Imax(8/20) 10KA limiting voltage Up 20V Network signal transmission rate Vs 10/100/1000Mbps self-adaption Network signal protection......
Shenzhen Qiutian Technology Co., Ltd
|
Overvoltage Type 1 Surge Protection Device Low Output Residual Pressure Stable Performance
|
...protection type1 + type2 surge protective device Product introduction Surge protector is the lightning protection measures taken by Zhejiang tohr Electric Co., Ltd., which is independently developed and manufactured for electrical system. It is designed according to IEO and GB standards. It is applied to power supply protection of equipment system in areas with high lightning risk. It can prevent all kinds of surge......
Zhejiang THOR Electric Co., Ltd
|
Yellow 20ka 3 Phase AC Surge Protective Device 385V For Lighting Protection
|
...Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm din-rail mounting. With working indication window,...
Hunan Heou Engineering Consulting Co., Ltd
|
HKSPD1 Control And Protective Switching Device Surge Protection Device 1P
|
... installations. It is designed according to ICE61643-1 and GB18802.1 standards, installed on DIN rail EN 60715 (35mm) by means of fast clip device. It is built in with failure interrupter device, will automatically interrupt when breakdown fails due to...
Yueqing Vorax Electric CO.,LTD
|
Standard Rail 35mm 3P AC275V SPD Surge Protective Device
|
... 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the...
YUEQING FEEO ELECTRIC CO.,LTD
|
LPEP 385/20M Series Surge Protective Device with 385V Max Continuous Voltage 35mm Rail Mounting and Up≤1.8kV Protection Level
|
The LPEP 385/20M Series Surge Protective Device The LPEP 385/20M T2 Series Surge Protective Device is designed for overvoltage/surge protection in power secondary systems, including distribution cabinets, feeder panels, control/monitoring panels, UPS ......
Guangzhou GENY Electric Co., Ltd
|
Industrial Network Switch Gigabit Fiber Din Rail 6KV Surge IP40 Fanless Unmanaged
|
...surge protection, adapt to a harsh outdoor environment Support Auto MDI/MDIX Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant DIN rail or Wall installation...
Shenzhen Olycom Technology Co., Ltd.
|
Submit your “din rail type2 surge protection device” inquiry in a minute :