Electricity Heating Glow Wire Tester For Lighting Equipment Flammability Testing
|
Product Description: 1. Glow wire tester Accord with IEC 60695-2-11, UL 746A, GB/T 5169.10, GB 4706.1 2. Glow wire tester Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
fire resistance test,glow wire tester,glow wire ignition tester,flammability tester
|
...glow wire tester,glow wire ignition tester Glow Wire Tester is designed to test the resistance to fire of insulating parts. It assesses the susceptibility of electrical insulating materials to ignition as a result of exposure to a glowing wire.This test method determines the minimum temperature required to ignite a material by the effect of a glowing heat source, under the specified conditions of test. Specification: Heating...
ALLIED TESTING (HK) CO.,LTD.
|
Glow Wire Tester Electrical Safety Test Equipment IEC60695-2-10 With Observation Window
|
...Glow Wire Tester with Observation Window 1. Standard of Glow Wire Tester: The glow wire tester is designed as perIEC60695-2-1, IEC60695-2-10~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic methods of Glow wire device> and IEC829, UL 746A, DIN695, VDE0471 etc. standards. 2. Introduction of Glow Wire Tester The glow wire tester......
Pego Electronics (Yi Chun) Company Limited
|
Glow wire test apparatus, glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester ,
|
Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(>77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated......
KingPo Technology Development Limited
|
IEC60695-2-13 Glow Wire Tester With Ф4mm ± 0.04mm Glowing Filament
|
...Glow Wire Tester With Ф4mm ± 0.04mm Glowing Filament The Standard describes a glow-wire ignition temperature test method for materials. It is intended to be used to measure, describe, and rank the properties of materials in response to heat caused by contact with an electrically heated wire......
Guangzhou HongCe Equipment Co., Ltd.
|
Glow Wire Tester
|
Glow Wire Tester Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot elements or Thermal stress caused by a heat......
Shanghai Glomro Industrial Co., Ltd.
|
IEC60695 Glow Wire Flammability Temperature Glow Wire Tester Digital
|
...Glow Wire Flammability Temperature Tester, Glow Wire Combustion Resistance Testing Machine, Glow Wire Burning T Digital Electronic Testing Equipment Glow Wire Tester Product description This instrument is designed and manufactured according to the requirements of "Glowing Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electrical......
SKYLINE INSTRUMENTS CO.,LTD
|
Professional Glow Wire Tester Flammability Test Equipment , Laboratory Testing Machine
|
...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in...
Dongguan Hust Tony Instruments Co.,Ltd.
|
GWT IEC60695 Electrical Parts Plastic Material Glow Wire Tester
|
...overload conditions. Glow wire testing simulates thermal stress caused by glowing elements or overloaded resistors in a short time, to evaluate the risk of fire. The glow wire test applies to electrical and electronic products, household appliance parts,...
Delta Technology (Chongqing) Co., Ltd.
|
UL746A Standard Glow Wire Tester Glowing Component Thermal Stress Test
|
... according to the standard of IEC60695-2-10, IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is...
Dongguan Kingpo Technology Limited
|
