Home > Tools & Hardware > Hardware > Other Hardware >

Ethernet Slip Ring With Rs232 Signal

1-10 Results for

ethernet slip ring with rs232 signal

from 7 Products

PROFINET Ethernet Slip Ring With RS232 Signal Swivel For Automatic System

PROFINET Ethernet Slip Ring With RS232 Signal Swivel For Automatic System ECN000-06P-02S-01EM is CENO’s new product PROFINET Slip Ring. CENO’s PROFINET slip ring have been developed to provide reliable products to allow transfer of the PROFINET protocol......

CENO Electronics Technology Co.,Ltd

Address: 3F,Bldg B,Xin jian xing industrial park,Guangming new Dist,Shenzhen,518107,Guangdong,China

2 Channels Gigabit Ethernet Slip Ring Shaft 2A-20A Current

... precision conductive slip ring that can rotate 360 degrees to transmit two channels of gigabit Ethernet signals. The slip ring has a hole diameter of 25.4mm and an outer diameter of 86mm. It can mix transmit 1-26 channels of 2-20A current and mix with...

Shenzhen Senring Electronics Co., Ltd.

Address: Room 101-301, No. 36, Xingda Road, Yanchuan Community, Yanluo Street, Shenzhen, Guangdong, China

RJ45 USB 2.0 Ethernet Slip Ring Signal Bore Size 12.7mm USB 3.0 through bore slip ring

...-T Volt AC/DC(V): mV~200Vac/Vdc Current(A): 2A/5A/10A Speed(rpm): 1~5000RPM broadband: Ethernet ( 1000 BaseT), Description: Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or...

Shenzhen JARCH Electronics Technology Co,.Ltd.

Address: No.201,Unit C,Guangfa Industrial Park, GuangTian Road, Luotian Community, Songgang Town, Bao'an, Shenzhen,Guangdong Province, China

Ethernet Slip Ring 6A IP54 100M Ethernet

... designed for Ethernet signal transmission. Working in a voltage of 240VAC, the slip ring has a low electrical noise of ≤15mΩ (50rpm). Moreover, it can operate in a wide working temperature of -40~+80℃. Strictly speaking, it is a custom slip ring that...

JINPAT Electronics Co., Ltd

Address: Rm 1503, A Bldg, Southen International Plaza,Yitian Rd,Futian Dist,Shenzhen,518017,China.

Industrial Ethernet Slip Ring Multi Circuits Network Cable Slip Ring

... slip ring features a versatile configuration with one circuit for gas transmission, four circuits capable of handling up to 10A current, and two groups of 100M network information transmission. It allows for simultaneous transmission of different signals,...

Shenzhen Hiscience co.,ltd

Address: 3/ F, Building 1, Hengchang Rong High-tech Industrial Park, No. 128, Shangnan East Road, Shajing Street, Bao 'an District, Shenzhen

SC MM 850nm 550m Ethernet Fiber Media Converter RS232 RS485 RS422

Industrial Serial RS232/RS485/RS422 Fiber Optic Modem Overview LNK-IRS93 series is an industrial grade RS232/RS485/RS422 to fiber optic converter which converts a standard RS232/RS485/RS422 signal to a fiber optic link as to extend the signal up to 2Km on ......

E-link China Technology Co., Ltd.

Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China

MxN Matrix Optical Switch Rackmount For Ring Network Testing Fiber Optical Component

...Fiber Type, LCD Display, RS232 Control and Ethernet Remote Management. Features SerialNet, High Reliability, High Stability LED display panel. Visual display, Convenient operation Transparent transmission signal. High stability and reliability Channel and...

Gezhi Photonics (Shenzhen) Technology Co., Ltd.

Address: 504,A Bld.,YiQuan Industry Park,FuQian Road No.434, FuCheng Street, Shenzhen, China 518110

Submit your “ethernet slip ring with rs232 signal” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Gezhi Photonics (Shenzhen) Technology Co., Ltd. Products: MxN Matrix Optical Switch Rackmount For Ring Network Testing Fiber Optical Component
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “ethernet slip ring with rs232 signal” inquiry

*From:
Your email address is incorrect!
To: CENO Electronics Technology Co.,Ltd
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories