IEC61032 Figure 3 Protection Verify Test Probe C For Hazardous Parts Test
|
... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool....
Sinuo Testing Equipment Co. , Limited
|
80mm Length Unjointed Figure 7 IEC 61032 Test Probe 11
|
...Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 test probe 11. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: Other access probes to verify protection of persons against access to hazardous live parts or hazardous mechanical parts This probe......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Figure 2 IEC 61032 Test Finger Probe B With Baffle Diameter 125mm
|
...Test Finger Probe B With Baffle Diameter 125 mm Standard: IEC60335-2-14 IEC 61032 figure 2, IEC60950 figure 2A, IEC60884, UL507, and UL1278 figure 8.4. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. Test Finger Probe Test......
Guangzhou HongCe Equipment Co., Ltd.
|
10 N Force Jointed Test Finger , IEC60529 Test Probe B Easy Operation
|
..., UL1278 figure 8 and EN60529 figure 2. The jointed test finger is intended to verify the basic protection against access to hazardous parts. It is used to verify the protection against access with finger. 2. Specification Jointed Test Finger: Diameter of...
Pego Electronics (Yi Chun) Company Limited
|
IEC61032 Test Probe,Test probe c, test probe d,2.5mm test probe,1mm test probe
|
...Test Rod Probe of IEC 61032 Figure 3 - Test probe C This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify protection against access with a tool. 2) 1,0mm Test Wire Probe of IEC 61032 Figure 4 - Test probe D This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection......
HK LEE HING INDUSTRY CO., LIMITED
|
Figure 17 IEC 61032 Test Finger B Bar 43 For Verifying Protection
|
Figure 17 IEC 61032 Test Finger B Bar 43 For Verifying Protection IEC61032 Figure 17 Test Bar 43 For Verifying Protection Of Visibly Glowing Radiant Heater Product information: This test bar 43 confirms to the IEC61032 figure 17 and IEC60335 standard ......
Dongguan Kingpo Technology Limited
|
IEC61032 Figure 6 Test Sphere Probe , Test Probe 2 Steel Ball
|
... SФ12.5+0.20 mm SФ12.5+0.20 mm Force ---- 50N Standard IEC61032 IEC60529 Product information: This test sphere probe confirms to IEC61032 figure 6 probe 2, IEC60529 of IP2. It is intended to verify the degree of protection of enclosures against ingress of...
Guangzhou Shice Equipment Co., Ltd.
|
IEC61032 Test Probe 32 Figure 15 For Enclosure Protection Test
|
... with nylon handle. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). Parameters:...
shanghai kerang technology co ltd
|
IEC Test Equipment Rigid Finger Probe With EC61032 Figure 7 Device 11
|
...Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Customizable: It can be used for anti-electric shock test......
KingPo Technology Development Limited
|
Submit your “figure 3 protection verify test probe c” inquiry in a minute :