IEC 60238 Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test
|
...Figure 4 Normal Operation Test Apparatus For Screw-Type Lamp Holder Test Product information: Standard: IEC60238:2016Edition 9.1 (2017) figure 4. Sample and restrictions: Screw-type lamp holder. Test purpose: Used to determine the stability and mechanical properties of the lamp holder. Test......
Sinuo Testing Equipment Co. , Limited
|
Manual IEC60884 Figure 20 Cord Retention Testing Apparatus
|
IEC60884 figure 20 cord retention test apparatus manual type Product details: This device conforms to the standard of IEC60884-1 table 18. It is used to test plugs, mobile sockets, fixed parts with wires and their couplings under the protection of the ......
Guangzhou Shice Equipment Co., Ltd.
|
13A Plug Socket Outlet Tester Adaptor Stainless Steel BS1363 Test Apparatus / Gauges
|
...Test Apparatus and Gauges for 13A Plug Socket-Outlet and Adaptor Standard Number Description Figure number QTY BS1363-1 Test pin BS1363-1:1995 figure 1 1 BS1363-1 Apparatus for mechanical strength test on resilient covers BS1363-1:1995 figure 2a 1 BS1363-1 Hardwood block for Figure 2a BS1363-1:1995 figure 2b 1 BS1363-1 Gauge for plug pins BS1363-1:1995 figure 5 1 BS1363-1 Apparatus for testing plug cover fixing screws BS1363-1:1995 figure...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60069-1 IEC Test Equipment Conductor Damage Degree Test Apparatus Rate 10 ± 2 R/Min
|
...Test Apparatus IEC 60069-1 Test Equipment Rate 10 ± 2 r/min Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes – Part 1: General requirements’ clause 12.2.5, figure 11 IEC 60669-1 ‘Switches for household and similar fixed electrical installations – Part 1: General requirements’ clause 12.2.5, figure 9 Standard description: Terminals with screw......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine
|
...Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure 11, IEC60669 and so on. This compliance is used for judging whether the design and the structure of the clamping screw......
Guangzhou HongCe Equipment Co., Ltd.
|
UL1017 Figure 18 Horizontal Flexing Machine / Reciprocating Test Apparatus
|
...requirements of UL1017-8.13.2.2. During the test, one end of the current-carrying hose is fixed on the slider and then the roller is wound, and a weight of 4.54KG is attached to the end. The slider moves back and forth and tests 20,000 times. Features: 1....
KingPo Technology Development Limited
|
IEC60065 Figure 11 Socket Outlet Torque Test Apparatus
|
.... A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. This device has the advantages of good sensitivity, easy adjustment, simple ......
Dongguan Kingpo Technology Limited
|
IEC60245 1 Wire Testing Equipment , Abrasion Test Apparatus HDX1304
|
...Test Apparatus HDX1304 Parameters: Power supply AC220V 50Hz Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute Test stroke 0.1mm up-and-down movement Working station 3 Weight 500±5g*3 Counter 0~999999 (can be preset) Dimension 1200×400×1400 (mm) Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure......
shanghai kerang technology co ltd
|
Low price ! pendulum izod metal materials impact test apparatus
|
...test apparatus is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load. The principle machine of the testing machine has single supporting column structure, cantilever type pendulum hanging mode; the pendulum body is U-shaped. The impact cutter is installed and fixed by screws......
jinan hardness STING EQUIPMENT CO., LTD
|
IEC 60335-2-9 Figure 102 Test Load for Testing Rotating Spits
|
...Figure 102 Test Load for Testing Rotating Spits The testing rotating spits load complies with IEC60335-2-9 Figure 102, the equivalent mass is about 4.5kg, made of stainless steel. Size: Diameter 100 * 85 mm Key A Load, mass approximately 4,5 kg B Fixing screw C Axis of load D Axis of fixing screw NOTE: The load is positioned on the rotary spit so that the fixing screw......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “figure 7 fixing screws test apparatus” inquiry in a minute :