IEC62368-1-2018 Edition 3.0 Annex V.1.3 Test Method 2 Unjointed Test Probe
|
...or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the unjointed probe enters the openings, test method 1 is repeated, except that the applicable jointed version of the...
KingPo Technology Development Limited
|
IEC 62368-1 Clause V.1.3 And Figure V.1 Opening Tested With Straight Unjointed Test Probe 30N
|
...2018 clause V.1.3 and figure V.1 (but straight unjointed version), and etc. It is used in the enclosure protection test of the electrical equipment that likely to be accessible to the children.Easily accessible enclosure live parts or mechanical parts. It...
Sinuo Testing Equipment Co. , Limited
|
80mm Length Unjointed Figure 7 IEC 61032 Test Probe 11
|
...Test Finger Probe Figure 7 Test Probe 11 Unjointed Test Finger Standard: IEC 61032 ‘Protection of persons and equipment by enclosures – Probes for verification’ figure 7 test probe 11. IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ Application: Other access probes to verify protection of persons against access to hazardous live parts or hazardous mechanical parts This probe......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Unjointed Finger Probe Test Meets IEC61032 Standard Figure 7 Requirements
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of...
Pego Electronics (Yi Chun) Company Limited
|
IEC 62368 Test Probe Kits
|
... 20 mm Terminal Probe 1) Straight Unjointed Test Probes 2) Figure V.2 - Jointed Test Probe 3) Figure V.3 - Blunt Probe 4) Figure V.4 - Wedge probe 5) Diameter 1 mm, Length 20 mm Terminal Probe Company introduction HK LEE HING INDUSTRY CO., LIMITED are...
HK LEE HING INDUSTRY CO., LIMITED
|
IEC62368 Jointed Test Probe / Finger Length 80mm Diameter 12mm
|
..., IEC335, UL507, EN60529 figure 1, UL1278 figure 8.4 and etc. Standard description: Test Finger Probe IEC62368-1 T.3 Steady force test, 30 N Test Finger Probe The test is conducted by means of the straight unjointed version of the applicable test probe of...
Guangzhou HongCe Equipment Co., Ltd.
|
Iec 61032 Test Ul Finger Probe 11 For Unjointed Test Finger
|
Product Description Complies with IEC61032 Figure 7 Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing......
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “figure v 1 unjoint test probe” inquiry in a minute :