Synthetic Brake Fluid DOT3 Certified To SAE J1703 And FMVSS No.116 DOT3 Standards
|
... product quality meets or surpasses international and national requirements such as SAE J1703, FMVSS No.116 DOT3, ISO 4925, and GB 12981 HZY3. It is compatible with hydraulic brake systems found in a variety of foreign and domestic automobiles, and it can...
Guangzhou Biaobang Car Care Industry Co., Ltd.
|
Lubemaxx DOT 3 Brake Fluid Corrosion Resistant Meets FMVSS No 116 DOT3 Standards
|
... and United States Federal Motor Vehicle Safety Standard No. 116 DOT 3 and ISO 4925 specifications. They are completely miscible with one another and are compatible with other approved DOT glycol ethers and borate brake fluids. However, do not mix with...
LUBEMAXX LUBRICANTS LTD
|
Ptfe Nylon Colored Stainless Steel Braided Brake Hose Assembly 3.2mm 1/8''
|
... hose Meets FMVSS-106 and SAE J1401 specifications Every brake hose pressure tested to 3000 psi( 207 bar or 20.7Mpa ) Burst pressure:minimum 7250 psi ( 500 bar or 50Mpa ) Temperature range -73°C to 232°C Compatible with DOT3,DOT4 and DOT4+ brake fluides...
HENGSHUI BRAKE HOSE MACHINERY CO.,LTD
|
air brake hose SAE J1402
|
... 2.>*Ozone an UV resistance 3.>*High corrosion resistance 4.>*Compatible with FMVSS 116 DOT 3, DOT 4 and most non-petroleum based brake fluids 5.>*Low and high temperature toughness range -40°C to 135°C Technical parametersofSAE J1401 EPDM air brake...
QINGDAO GUOSONG MACHINERY PARTS CO.LTD
|
