BIFMA X5.1 & BIFMA X 5.4 Chair Stability Tester Forward and Rear Stability Testing Machine
|
...rear stability of chairs. Testing Standards ANSI/BIFMA X5.1-2017 11;12 Specification Cylinder Stock 250mm Horizontal Force 20N The engine power About 20W Loading Position 60mm away from the front of center of the seat surface Seat Compression plate Diameter 200mm,arc surface300mm Machine Dimension 1350 mmx1000mmx1850mm (L * W * H) Test Area 780mm*740mm(L*W) Main test...
SKYLINE INSTRUMENTS CO.,LTD
|
Chair Front Rear Stability Testing Machine With Standard ANSI / BIFMA X5.1
|
...Rear Stability Testing Machine TNJ-023 Chair Seats Front Stability Test Machine Introduction of product: This machine is suitable to test the seats (such as chairs, office chairs) front stability. Principle: Put the test-piece on the test table, blocked the front leg, apply specified force with forward 20N applied at seat loading point, check the article tends to overturn forward or not to determine the test-piece forward...
Dongguan Hust Tony Instruments Co.,Ltd.
|
30 ~ 65cm Furniture Testing Machine / Chair Stability Test Equipment BS EN 581-2
|
...Stability Test Machine Furniture Testing Machine BS EN 581-2 Description: This stability test apparatus used to test the stability performance for chairs seating. Standard: EN 1022:2005, BS EN 1335-3:2009 5.9, BS EN 581-2 Test items: Forward stability test: EN1022 6.2 Forwards overbalancing, all seating- EN1022 6.3 Forwards overturning for seating with footrest Sideways stability test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Baby Strollers Testing Machine Stability Testing Platform Electronic
|
...Testing Machine Stability Testing Platform Electronic 1. Test method : Baby Stroller Stability Testing Platform is placed on the test plane of the tilt angle of 12 ° , do not use the parking device , first for the front , then rear-facing , then the vehicle lateral placed on an inclined plane , for each test......
Dongguan Haida Equipment Co.,LTD
|
ECE R22.05 Helmet Anti - Drop Test Machine High - Speed Impact GB 811
|
...Test Machine High-Speed Impact GB 811 Standards: GB 811,ECE R22.05 Helmet anti-shedding tester use: Apply a certain amount of initial load to the rear of the helmet, and then drop the weight from a certain height with a standard prescribed weight to apply the impact force to the helmet, so as to judge the helmet wearing stability. Technical parameters of helmet anti-drop test machine......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
EN 1335-3 BIFMA X5.1 600N Stability Tester For Chair Testing
|
...the test table, the front foot is blocked with the block. Apply a certain load on the seat surface, apply 20 N of force to the loading point. Check whether the specimen is tilted forward to assess the forward stability of the specimen; also can test the...
Gester International Co., Ltd
|
Low Noise and Stability Benchtop Electric Pencil Hardness Tester Moving Speed 5mm/s
|
... products, such as mobile phone shell, MP3/MP4 shell, notebook computer shell, etc. The machine is an electric (semi-automatic) control. The machine moves through a stepper motor to achieve forward and backward movements with low noise and stability!...
DongGuan Q1-Test Equipment Co., Ltd.
|
Low Noise and Stability Benchtop Electric Pencil Hardness Tester Moving Speed 5mm/s
|
... products, such as mobile phone shell, MP3/MP4 shell, notebook computer shell, etc. The machine is an electric (semi-automatic) control. The machine moves through a stepper motor to achieve forward and backward movements with low noise and stability!...
Dongguan Quality Control Technology Co., Ltd.
|
250 Kv X Ray Pipeline Crawler Machine Ndt Radiographic Testing Pipe Weld Inspection
|
... can control the exposure moments and manipulate the X-ray pipeline crawlers to move forward or backward via magnetic orientator. Magnetic locators have the following features: higher positional accuracy, strong penetrability, and higher stability. The...
HUATEC GROUP CORPORATION
|
Submit your “forward and rear stability testing machine” inquiry in a minute :