Ring Wave Generator Equipment ZLB61012T Series
|
Ring wave generatorZLB61012T Series The oscillation wave of the equipment may affect the reliable operation of the equipment and the system. The ringing wave is caused by the switching of the power supply and the control line switch or the lightning strike, and appears on the terminal of the equipment (device port). Products meet IEC61000-4-12 and GB/T17626.12 and IEC255-22-1,GB/T14598.13 standards. Meet the criteria: IEC /EN 61000-4-12GB/T17626...
KingPo Technology Development Limited
|
100KHz/0.5μs Ring Wave Generator 16A CDN for Simulating Oscillatory Transient LCD Touch Screen
|
...Ring Wave Generator 1. Introduction of Ring Wave Generator Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45. The ring wave is a typical oscillatory transient, induced in low-voltage cables due to the switching of electrical networks and reactive loads, faults and insulation breakdown of power supply circuits or lightning. The ring wave...
Pego Electronics (Yi Chun) Company Limited
|
3E904KAT2 18.8*25*4 harmonic drive wave generator bearing
|
...wave generator bearing Bearing Inner ring Outer ring Width Dynamic load rating Static load rating Radial Deformation Input rotate speed Output torque Model ID OD B Cr Cor Max. mm r/min N.m 3E904KAT2 18.8 25 4 3.75 3.12 0.2 3000 2 Robots Flexible bearings(harmonic drive strain wave......
LUOYANG MONTON BEARING SCIENCE & TECHNOLOGY CO.,LTD.
|
Submit your “gb t17626 12 ring wave generator” inquiry in a minute :