Flange Or Groove Type Non Rising Stem Resilient Seated Valve UL FM Approved
|
...used to support upright indicator posts. Valves without base flange are used with wall indicator or tee-wrenches in buried serivces Outside Screw and Yoke gate valve are used indoors or outdoors pits and NRS valves are used with wall indicator posts or...
Suzhou Alpine Flow Control Co., Ltd
|
DN100 PN16 GGG50 non-rising gate valve
|
DN100 PN16 GGG50 non-rising gate valve Specifications 1.Production Size:2”-40” DN50-DN1000mm 2.Pressure range:PN10,PN16 3.Design Standard:BS5163,BS5150 4.Face to ......
HEBEI PAWOFUOU VALVE AND PIPE FITTING TECHNOLOGY CO.,LTD.
|
200PSI NPT Thread End 200WOG Non Rising Gate Valve/WCB / CF8M/ANSI Screwed Hydraulic Gate Valve
|
1) DESCRIPTION: Gate valves are widely used for all types of applications and are suitable for both above ground and underground installation. Not least for underground installations it is paramount to choose the right type of valve to avoide high ......
KCM TECH GROUP COMPANY
|
300LBS 600LBS 900LBS CS Forged A105 Body 13%CR Wedge Non Rising Gate Valve
|
Gate Valve 800Lb Standard Material Specifications NO. Part Name CS to ASTM AS to ASTM SS to ASTM Type A105 Type F22 Type F304(L) Type F316(L) 1 Body A105 A182 F22 A182 F304(L) A182 F316(L) 2 Seat Ring A276 420 A276 304 A276 304(L) A276 316(L) 3 Wedge A276 ......
WENZHOU ANRY VALVE CO.,LTD.
|
Ductile Iron Fullway Gate Valve BS5163 Rising Gate Valve
|
...Rising Stem Metal Seated Gate Valve 1. PRODUCT PROFILE Metal seated wedge gate valves are primarily designed for the flow isolation of a length of pipeline or piece of equipment. Our metal seated flanged gate valve is manufactured from ductile iron with WRAS approved parts and features a metal seated wedge and non-rising spindle design with gunmetal seats. Designed for water, these blue epoxy coated valves......
Anhui Prosper Flow Technology Co., Ltd
|
DIN3352 C Type Cast Iron Gate Valves Elastic Sealed Non Rising Stem Gate Valve
|
Technical Specification Connection type flange, DIN2501, PN10/PN16 Sealing type Soft seal (EPDM rubber or NBR) Design standard DIN3352 Face to face dimensions DIN3202/ISO5752 Valve testing DIN3230 Working temperature NBR≤80℃, EPDM≤120℃ Structural length ......
SuZhou YouWei Fluid Technology CO., LTD
|
Linear Pneumatic Valve Actuator Pneumatic Linear Valve Actuator Automating most types of rising stem valve
|
Pneumatic linear piston actuators are well-suited for a variety of valve types, including: Gate Valves: These actuators are commonly used to open and close gate valves, which regulate the flow of liquids or gases through a passage. Globe Valves: Linear ......
Veson Valve Ltd.
|
Pn16 Dn100 Non Rising Stem Resilient Flanged Gate Valve Wedge Gate Valve 200psi Steel Gate Valve
|
... disk and the disk moves perpendicular to flow to start or stop the fluid flow in piping. A gate valve is the most common type of valve used in any process plant. It is a linear motion valve used to start or stop fluid flow. In service, these valves are...
TOBO STEEL GROUP CHINA
|
Soft Seated Cast Iron Water Gate Valve Non Rising Stem Resilient WCB Body
|
... Manual operation standard, gear operator and actuation available Butt weld end Flange end: raised face or ring type joint Size:2"~40" Pressure:150LB Material: WCB, WCC, LCB,...
Suzhou Ephood Automation Equipment Co., Ltd.
|
Non-Rising Stem Gate Valve NRS 2-36 Inch Class 150-900
|
...Non-rising Stem Gate Valve NRS Handwheel Operation Non-rising stem gate valve is used where vertical space is limited or underground. The stem is threaded into the gate. As the handwheel on the stem is rotated, the gate travels up or down the stem on the threads while the stem remains vertically stationary. This type of valve has a pointer indicator threaded onto the upper end of the stem to indicate the position of the gate......
Shanghai Kolink Valve Co., Ltd.
|
Submit your “groove type non rising gate valve” inquiry in a minute :